Truck-Lite

This replacement Grommet Kit will house a 2-1/2" Round Marker Light. The kit includes a grommet and plug-in.

These 33 Series 3/4" Sealed LED Lights from Truck-Lite are the worlds smallest LED marker for the transportation industry. Choose from a Red or Yellow light, both colors come with a clear lens and they are completely sealed in epoxy to resist corrosion and moisture. These lights draw less current, which allows for more power on your other vehicle requirements.

This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents. Available in Amber and Red.

Truck-Lite model 15 clear license plate lamp.

"LED" represents the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

Fits in most narrow header rails and mount vertically or horizontally. Long-life 15,000-hour bulb. Snap-lock tabs allow quick and easy installation. Suitable for PC requirements on a 45-degree angle.

World's smallest LED marker lamp for the transportation industry. The light exceeds legal requirements and is designed as a hardwired lamp easily retrofitted. LEDs draw less current, allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture. Offers trailer engineers and manufacturers new trailer and rear door structure design flexibility. Requires 3/4" mounting hole, material thickness for flange is 040"- 250", material thickness for crommet is 125" - 250".

Designed to fit in tight spaces, fits in most narrow header rails. Can be mounted vertically or horizontally. Snaplock tabs allow quick and easy installation. Replaces Signal-Stat 1900 series.

30 Series high profile LED marker clearance light is designed with 8 diodes and built as a red round light. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

These 33 Series 3/4" Sealed Red LED Lights from Truck-Lite are the worlds smallest LED marker for the transportation industry. This light comes with 3 Red LED Lamps with .180 bullets and grommet mounts. All 3 lights are connected to the same power cord. Lights come with a polycarbonate lens and housing, PVC grommets, Nylon flange and 16 gauge wire.

Rugged all purpsoe work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparable incandescent lamps. LEDs have no filment, therefore are extremely resistant to shock and vibration and also have less current draw, resulting in increased battery an alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware. Mounts on one 5/16"-18 stud.

Innovative optic design allows one PC-rated lamp the ability to function as two. Draws less current, allowing more power for other vehicle requirements. Uses standard mounting holes and accessories. PC-rated lamps have 8 diode pattern.

1 Wire backup light kit with tail. This product replaces part number BL-187.

Less Current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture.

Less current draw, resulting in increased battery and alternator life while allowing more power for other vehilce requirements. Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination clearance/marker applications.

Truck-Lite SS605 is a 6 oval, red LED Stop/Tail/Turn light with two lens color options. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. Featuring a unique display array, this extremely bright light provides more visibility, and its quality construction ensures performance and longevity for lower overall operating costs. Available in clear or red, the polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.

Designed to enhance appearance of lamps. Flange cover offers improved theft resistance.

Slim 3/4" wide design making the lamp a perfect solution for narrow rail designs. Must be mounted horizontally. Not suitable for PC requirements.

Innovative optic design allows combination lamp to function as two. Draws less current, allowing more power for other vehicle requirements. Designed to fit applications requiring minimal space. Must be mounted horizontally. Standard red lamps have 2 diode pattern and standard yellow lamps have 4 diode pattern.

Wabash and Monon replacement. Lamp designed for PC requirements on a 45-degree angle in mounting devices #30720, #00801, #00803, #00804 or surgace mount flange. Replaces Signal-Stat 1030 series.

Features unique plug-in design for ease of installation. Low-profile, extra-strength base. Suitable for PC requirements on a 45-degree angle. LED and incandescent lamp kits available.

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. Stripped end and ring terminal Fit 'N Forget S.S. plug.

Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination clearance/marker applications. Flange gasket available for additional protection. Electronics completely sealed in epoxy to resist corrosion and moisture.

Super 21 Diamond Shell Marker & Clearance Light. Option of red or amber lens color and built with a super 21 plug. This light meets P2/PC standards.

Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet terminal plug.

Full pattern light output. Popular on show truck applications. Designed for areas with limited space. Not suitable for PC requirements. Hardwired design eliminates pin corrosion.

Truck-Lite SS455 is a rectangular red Signal State LED Stop/Tail/Turn light. The light is available with 10 or 24 diodes and measures 3 x 5 . The more diodes, the brighter the light. This light can be installed horizontally or vertically and connects with a standard right angle PL-3 connector. The sealed lens is made from acrylic, and epoxy encapsulates the electronics. The quality construction ensures performance and longevity for lower overall operating costs.

Truck-Lite SS605A is a 6 oval, amber LED Stop/Tail/Turn light with two lens color options. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. This light provides more visibility than incandescent, and there are no filaments to break, making them shock resistant. The quality construction ensures performance and longevity for lower overall operating costs. Available in amber or clear, the polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.

Lamps operate in minor and major output levels; major function activated by the brake function or turn signal. Yellow Major function is 3 times brighter than minor function. Red Major function is 7 times brighter than minor function. Provides marker/clearance solution that requires no mounting brackets or installation screws. Lamps adhere directly to application surface through use of heavy-duty adhesive backing. Electronics are completely sealed in epoxy to resist damage caused by moisture and corrosion. Rear exit wire version requires a 3/8" mounting hole, and self-seals hole upon installation. Care should be taken for proper installation.

With 50 percent more harness ports, alleviates the need for multiple boxes, while allowing for the addition of more harness systems and increased lighting needs. Larger box makes it easier to work on internal connections. Clear lid offers easy viewing of connections without having to remove lid, saving time when trying to identify lighting system problems. Dual ''Dog bone'' ground strap feature allows 4 terminals to be common, replacing the need for multiple junction boxes, offering additional cost savings. Silicone gasket on lid helps to eliminate damage from moisture and corrosives within the box, reducing costly repairs. Made of high impact, chemical resistant, approved insulating plastic providing a long service life and eliminating the time and money needed for repair and replacement. Mounted by four eyelet-reinforced holes in base of box for increased durability. Contains 12 pre-tapped holes to accept compression fittings or filler plugs allowing for greater configuration versatility. Uses 50 Series compression fittings or 50830 filler plugs (6 included in kit).

Marker clearance plug is used in space limited areas. Built as a 7" 16 gauge GPT wire with tin plated brass terminals.

For use with double contact sealed incandescent lamps. Plug is a 11" of 16 gauge GPT wire with tin plated brass terminals.

Signal-Stat marker clearance light with a standard connection. Unique 6 diode starburst light output. The light is not suitable for PC requirements.

Truck-Lite SS4051 is a 4 round red Signal-Stat LED Stop/Tail/Turn light with a clear lens. The super bright light emits 24 diodes. Epoxy-encapsulated electronics prevent damage from moisture and corrosion, and a standard PL-3 plug secures the wiring connection. The polycarbonate lens is sealed for further protection from the elements.

Flush mounts 2-1/2" diameter lamps. Suitable for PC requirements on a 45-degree angle when using LED or incandescent PC-rated/combination lamps. Closed-back versions recommended for open installation where splash plate is not used.

This standard lamp has 2 diodes. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture.

This light is used as a dome or utility lamp and comes with a 4 screw surface bracket mount for easy installation. Built with a raised lens for maximum output and has a push button switch.

Truck-Lite SS6058 is a 6 oval, red LED Stop/Tail/Turn light with two lens color options. This 10-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. This light provides more visibility than incandescent, and there are no filaments to break, making them shock resistant. The quality construction ensures performance and longevity for lower overall operating costs. The polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.

Flush mount 4" diameter lamps in a 4 1/2" hole. Designed to provide additional shock absorbence to ectend lamp life. TPR grommet designed for extreme environmnetal appliations and eliminated outgassing.

Right angle design for use in limited space areas. 6.5" 16 gauge GPT wire with tin plated brass terminals. Built as a marker clearance PL-10 right angle plug with a stripped end and ring terminal connection.

Features epoxy black painted steel or aluminum construction. Designed for 60 Series products with grommet or flange mounts.

Designed to fit applications requiring minimal space and is less susceptible to shock and vibration. Uses standard mounting holes and accessories. Not suitable for PC applications. Draws less current, allowing more power for other vehicle requirements. Direct pin-to-circuit board solders assure vibration-resistant contacts.

Slim 3/4" wide design making the lamp a perfect solution for narrow rail designs. Must be mounted horizontally. SAE PC-rated for combination clearance/marker applications.

Rugged all purpsoe work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparable incandescent lamps. LEDs have no filment, therefore are extremely resistant to shock and vibration and also have less current draw, resulting in increased battery an alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware. Mounts on one 5/16"-18 stud.

Flush mounts 2" diameter Truck-Lite lamps.Suitable for PC requirements when using LED or incandescent PC-rated/combination lamps. Closed-back versions recommended for open installation where splash plate is not used.

Popular on owner/operator and show trucks. Standard PL-10 connection. Unique 13 diode starburst light output. Encapsulated electronics prevent damage from moisture and corrosion.

This light is a rugged all purpose work lamp with general purpose "work" pattern. LED light is whiter and brighter than comparabe incandescent lamps. LEDs have no filament, therefore are extremely resistant to shock and vibration LEDs have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Includes stainless steel mounting hardware, mounting on one 5/16"-18 stud.

Flush mounts the 60 Series Truck-Lite lamps. Provides lamps with additional shock absorbency to extend lamp life. TPR grommet designed for extreme environmental applications and eliminates outgassing. Semi-closed back recommended for incandescent lamps to protect lamp and wiring while allowing heat to escape. Closed back recommended for LED products only and protects against corrosion and stone damage

High-impact polycarbonate lens and housing are sonically sealed. Heavy duty shock mounted bulb. Legal mounted vertically or horizontally. Only one lamp required to meet federal lighting regulations. Not recommended for dome lamp use.

30 Series low profile LED marker clearance light is designed with 6 diodes and built as a red round light with a gray flange mount. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptibe to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

Truck-Lite 44326R is a 4 round red Super 44 LED Stop/Tail/Turn light. This light emits six diodes and includes a permanent black flange for mounting. The LED light offers faster illumination and low amp draw. A Fit N Forget PL-3 plug secures the wiring connection. The light s electronics are completely sealed in epoxy to resist corrosion and moisture, and the impact-resistant polycarbonate lens is sealed for further protection from the elements.

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. The connector is a .180 bullet and ring terminal Fit 'N Forget S.S. plug.

This grease can be used to seal electrical switches to prevent dirt or water from sticking. This grease also helps prevent corrosion.

Uniquely designed shock mount extends lamp life. Sealed polycarbonate lens and housing resist heat and impact. Flange and flush mount grommets designed for mounting in a 4-1/2" hole. Not recommended for dome lamp use. Upgrade to LED lighting systems using Truck-Lite Super 44 Series products.

Truck-Lite SS4050 is a 4-1/4 round, red LED Stop/Tail/Turn light. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. Featuring a unique display array, this extremely bright light provides more visibility, and its quality construction ensures performance and longevity for lower overall operating costs. The polycarbonate lens and epoxy encapsulation keep moisture away from the electronics, and the grommet mount offers a clean look. Two-year warranty.

Metalized reflector version offers more intense focused light. The light offers dual or quad flash pattern and meets recommended SAE J1318 and J845 photometric specifications. Synchronized alternating feature. Lamp life rated at 100,000 hours and is resistant to shock and vibration. Fit 'N Forget adapter plug provides corrosion and moisture resistance. Integral flange option features built-in lens.

Upgrade your vehicle to LED technology, allowing significant return on your investment. LEDs have no filament, therefore are not susceptible to shock and vibration and also have less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. LEDs have faster illumination which offers a significant safety benefit for following drivers to react quicker, resulting in an average of 3 reaction time advantage for every 10 mph. Grommet provides improved water resistance between the lamp and wiring. Features stop, turn, tail, clearance, back-up and license functions; three stud mounting design with ground function.

For use with double contact sealed incandescent lamps. Built as an 11" 16 gauge GPT wire with tin plated brass terminals. PL-3 stripped end and ring terminal plug.

Extra strength plastic construction. Easy snap-in lamp installation. Suitable for PC requirements with incandescent lamps.