Towing Accessories

Due to manufactuing changes, current lead time is 4-5 weeks.

Utilize this professional tow coupler kit from AW Direct to quickly supply air to disabled trucks or buses in preparation for proper and safe towing. This 7-piece air coupler kit comes with 7 fittings which allows for applications on many different truck makes and models giving you the tools you need to get the job done efficiently. This kit also eliminates the need to seek out air supply tanks under the vehicle. It comes with a handy storage box along with a complete part listing for easy individual tool identification and replacement.

These skates make loading and unloading disabled vehicles easier with a groove in the middle to accommodate brake rotors or vehicles without wheels. Interlocking plastic skates cause vehicles to glide towards the pull, with or without wheels, whether loading or unloading a carrier or removing a car from a tight parking space.

These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.

ITI Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

This crash wrap from Global Film is a heavy duty 4 mil 3-layer CoEx film designed to provide surface and interior protection for a variety of outdoor automotive salvage and towing applications. Special poly-ethylene blend contains 25% metallocene to provide high resistance against puncture and tear. A UV additive offers outdoor protection for up to 60-days. Water based acrylic adhesive system provides instant tack even in demanding outdoor conditions and is safe to use. Simply press one end to the vehicle's surface to start seal/wrap until the area is covered. CW18100P and CW36100P include perforated tear lines every 24", so you only use what you need.

GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design eliminates the need for electric power, compressed air, or slow hydraulics.

The GuniWheel Universal Vehicle Mounting System is the go-to tool to provide temporary mobilization of cars, SUVs, pickups and also trailers. With its patented universal lug nut pattern design, the GuniWheel provides fitment for thousands of makes and models of vehicles.

Due to manufactuing changes, current lead time is 4-5 weeks.

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!

ITI Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates will drastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!

These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.

In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as Each.

This 90 degree elbow quick-connect fitting works well with the International Pro Star truck models. It connects to the air supply line on the driver side, inside of the frame rail.

These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.

This film quickly covers damaged vehicles for transport or storage to prevent additional damage from the elements. Works in hot and cold temperatures. Ideal for securing loose parts during transport. The tint makes it easier to see and any markings are more visible.

Every heavy-duty tow operator should own a pair of these U-Bolt Lifting Attachments from AW Direct. This high-carbon steel attachment is designed for faster and easier rear hook-ups on medium- and heavy-duty trucks. The beveled receiver acts as a funnel to guide the U-bolt and nut from the spring saddle onto the fork. The extra height of 5" extender allows you to stay clear of air brake and air suspension parts. The shaft is three inches tall and has a diameter of 2". The diameter of the beveled guide on the attachment is 1-7/8".

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 4-in-1 Axle Caps fit most 8-bolt tandem and large single axles - the most popular hub on the road.

We have an assortment of Zip's AW Direct toy tow trucks for sale now! Your toy tow truck will be randomly selected and sent to you depending on truck availability and on-hand inventory.

Note: Special Handling Fees Apply for Specific Items

Tow like a pro with the 74-inch long Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This ramp gives 7 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide. It can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. The ramp will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramp to be used on gravel or other rough surfaces that you may encounter along the side of the road.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

• Tow Truck Flatbed Extension Ramps
• Sold as a pair
• Available in a single piece or in 2 pieces
• Dimensions: 74"L x 10"W x 7"H
• Lightweight - only 13.5 lbs
• Each ramp supports 2,500 lbs. Total vehicle capacity per pair: 10,000 lbs
• Highly durable, virtually indestructible, and very stable
• Easy to use, store and transport
• Unscootable! Won't slip or slide, no matter the surface
• Safer than using boards
• Provide a professional appearance when transporting exotic cars
• Load Corvettes, Porsches and other low profile cars without doing damage

This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.

Trim-Lok's edge trim is flexible Poly Vinyl Chloride (PVC) trim with individual internal metal clips and gripping tongue to provide a stronger grip. As you likely already know, having the right rubber trim for metal edges can make an impact on any project. Whether you run an auto repair shop and need sewable upholstery trim for cars and trucks or manufacture furniture for a living and require decorative trim for your line of products, Trim-Lok manufactures flexible edge trim that can be used in many different industries. As an added bonus, each flexible edging strip purchased from Trim-Lok is manufactured with individual internal metal clips and a gripping tongue. These clips and tongue provide a stronger grip, meaning Trim-Lok's line of edge trim products will last longer than many alternatives available on the market. If you're looking for a flexible metal trim with strong gripping power, excellent resistance to sunlight, water, and the ozone, and a strong, outer coating material, look no further- build your own edge trim today and see the difference for yourself.

This Truck and Trailer Wheel Pan catches the oil that spills from the wheel hubs after the caps are removed. Fits 13-3/4" I.D. rims or larger. Side compartments hold lug nuts, preventing them from getting oily or lost. Sturdy polypropylene construction won't warp if oil is warm. Holds 88 oz.

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

Essential to heavy-duty tow operations, this 1/4" brass air fitting allows tow operators to tie into the existing air system of a Class 8 Volvo or Mack commercial truck to supply air to the brake system when the power unit is disabled and can no longer perform this function. Using air supplied by the rear of the tow truck, this application allows the tow operator to release the casualty's brakes and prepare it for towing. Simply install directly to the metric threads on the air tank of a Volvo or Mack tractor.

This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

Due to manufactuing changes, current lead time is 4-5 weeks.

Utilizing the Low Pro Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! This patented skate has a low-profile design achieving an overall lower height of the container when loaded on a trailer or a flatbed on a truck. Place the sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

Tow like a pro with the 42.3" long Compact Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This compact ramp gives 4.5 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide, and it can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

ITI Yellow Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.

The In The Ditch Cycle Caddy is the easiest way to load a motorcycle onto the deck of a carrier. The innovative Speed Ramp on the Cycle Caddy makes loading a motorcycle smooth and nearly effortless. No more having your cycle loader jump out of the way as you try to load a motorcycle. Our Cycle Caddy stores in a folded, compact position saving you valuable room in your tool box. The Cycle Caddy not only stores easily it also assembles easily and has easy to follow instructions printed right on it. This Caddy is made from steel, comes in a tuff coat black finish, and is strong enough to support a motorcycle up to 950 lbs.

Access Tools Collision Crash Wraps extra thick 4mil material is puncture resistant and features extended UV protection. With a high-tack adhesive that leaves behind no residue, this film is perfect for storing a vehicle on your lot or for protection during transport. Every roll of Crash Wrap comes with a Crash Wrap Cutter, specially designed to help cut safely through the durable material without any exposed blades or danger of damaging the vehicle.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

Note: Special Handling Fees Apply for Specific Items

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

SafeAll's Proportional Remote Control System allows tow operators to control car carrier or industrial carrier functions with just a twist of the wrist. As the remote is rotated by hand, the selected actuator provides proportional lever action for a precise bed angle, wheel lift placement or desired winch speed. The proportional feature of the SafeAll remote system also provides the operator with the confidence to load or hook up the most luxury vehicles or specialty equipment, limiting the risk of causing damage. The feathered control functionality the SafeAll system provides is also much safer than competitive wireless remote systems, which have very jerky, on-off functionality.

Preserve your brakes, improve your stopping distance and maintain safety while towing heavy-duty trucks with the SafeAll Remote Brake Assist, formerly known as the Brake-Buddy. Secured inside the cab of the disabled vehicle, this supplemental brake actuator works in tandem with the tow truck and helps keep you in compliance with federal law.

This is a locking pin for the simple mounts for In The Ditch.

ITI Low Profile Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. This skate is perfect for use with high-end vehicles with low clearance concerns. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

Easily recover heavy-duty trucks by turning your underlift stinger into a truck bar with this Chain Fork. Made from high-tensile steel and machined from a solid bar for extreme strength and durability. Grooved to accept 1/2" and 5/8" chains.

This adapter requires

Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.

This two-part carbonless Towing Dispatch Log Book allows you to record the important data on each call while providing a copy for your drivers to take with them. Each form contains all the information you will need including club information, all vehicle information, equipment needed and more. Get 50 2-part forms in each spiral bound book.

Keep all your register forms neat, clean and organized with these Plastic Portable Register Form Holders. Cover provides a smooth, solid writing surface and used forms are stored in the back of the registers. Made of durable gray plastic.

This Fork is used on a Gillis Bus. The bottom portion of the fork connects to the wheel lift and the top portion of the fork fits into the provided holes that are on the underside the Gillis bus.

Note: Special Handling Fees Apply

This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.

• Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
• Use from the bottom of your fork holders with the 124001948 king pin adapter
• Includes a pintle hook rated at 30,000 lbs. for towing

This ITI Height Extender is designed to work in tandem with the ITI Control Arm Skate (Item #

This patented design from In The Ditch has a universal fit that allows you to use one hitch on different trucks. This hitch will be a real money maker for your truck. Stop sending two trucks to do the job of one. With this power hitch you can bring the customers pickup in on the deck and bring the trailer in on the wheel lift. The power hitch fits any wheel lift with 3" x 3" up to 4" x 4" crossbars, and works perfect on wreckers or carriers. The power hitch includes a 5th wheel hitch and goose neck ball. The power hitch pins on and off in minutes and has a 12,500 lb. rating.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.

The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.

This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.

This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.