Toolbox Shelving & Accessories

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by square foot. Also available in 3'x4' Sheets and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

Use alone or stack together Front, side and back grips for easy handling Reinforced sides prevent spreading High-density, FD-approved polypropylene material holds up under heavy-duty conditions in work truck shops, towing operations and service garages. Won't rust or corrode and is unaffected by weak acids and alkalis. Built-in rear hanger allows bin to hang from louvered panels or racks.

Please Note: Product Discontinued - ALL SALES FINAL!

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!

This Floor Jack Tray from In The Ditch is a perfect solution for storing a Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a 13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle incorporated into one mount.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x12' Rolls. Also available in 1'x1' Tiles and 3'x4' Sheets. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

These Phoenix rubber mat for toolboxes are smooth on both sides. These rubber mat measures 36",48", or 60"W x 18"D.

Zip's Custom Standard Toolbox Shelf Kits are an easy way to optimize the dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. These standard shelf kits get bolted to the inside of the toolbox. All necessary mounting hardware is included with these standard shelf kits. They are made from high quality .125" thick aluminum. These standard shelf kits not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Shovel or Broom mount for car carriers simply bolts to the bottom side of the subframe to store your shovel or broom. Threaded T-handle screws down to hold the tool in place. * Image shows two ZP-CBSH but these are sold individually

• Image shows two ZP-CBSH but these are sold individually
• For Dual see ZP-CBSH-10S-DUAL or ZP-CBSH-10S-DUAL-G
• LCG versions also availabe

Phoenix Adjustable ToolBox Shelf made from galvanized steel which can be installed into virtually any 18" x 18" toolbox in a matter of minutes.

These handy shelves are not only designed to make any shop or garage more organized they just look good to. These shelves are available in 3 different widths and 5 different depths. These shelves can be mounted with a gusset down offering a smooth sleek top surface or you can turn them over for a shelf that has a lip around the top. To make your life easier we include hardware so you can mount this holder to just about anything you want. We also include special peg board screws so you can screw the holder directly to peg boards. The special screws are slightly larger than the peg board hole and work great. They can also be removed and reused so you can move or add racks without destroying your peg board. Each mount is made from Aircraft grad aluminum and come with a 100 lbs. structural load rating. Remember though, it's up to you to make sure you mount them to a surface that can support the load you put on the shelf.

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Toolbox Top Tray with Light Holes. Includes (2) 6" Oval Light Cut-Outs. With Zip's Custom Toolbox Tray you will gain extra storage on top of your toolbox. This tray allows for additional storage for various accessories and tools. This 20" deep tray comes in various sizes to fit on any size under body toolbox you may have on your Tow Truck, Wrecker, or Car Carrier. This tray is made from high quality .125" thick aluminum. Requires hardware for bolt-on installation. 6" Oval Lights Not Included.

Note: Due to size of product, additional handling charges may apply.

• Zip's Custom Toolbox Trays
• Has Light Holes
• Gains Extra Storage Space
• Made from High Quality .125" Thick Aluminum
• Tray Lengths: 24" - 120"
• Fits Most Toolboxes on Your Tow Truck, Wrecker, or Car Carrier
  
  Available in the following sizes
  
  

  Item #	Length
  ZP-TBTA-24	24"
  ZP-TBTA-36	36"
  ZP-TBTA-48	48"
  ZP-TBTA-60	60"
  ZP-TBTA-70	70"
  ZP-TBTA-72	72"
  ZP-TBTA-78	78"
  ZP-TBTA-84	84"
  ZP-TBTA-96	96"
  ZP-TBTA-108	108"
  ZP-TBTA-120	120"

This is a Northern Factory Sales auxiliary toolbox heater with 16,000 BTU and has a high and low speed . It's compact in size 6 3/8 x 6 3/4 x 7 1/2 and is 12 Volts. This versatile heater may be mounted either horizontally or vertically. Typical locations include floor, wall or under dash. Route the heater hose to the engine compartment. We recommend the heater hose follow the inside of the frame rails for protection from road debris.

Note: Special Handling Fees Apply for Specific Items

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. These edges are 12"x2" and are sold individually. Also available in 1'x1' Tiles, 3'x4' Sheets, and 3'x12' Rolls. Complete your area with the Dri-Dek corner pieces to smooth and round out your full body mat.

Miller Industries 36" Toolbox Shelf for 36" Tunnel Toolbox (124004137) on Aluminum Heavy Duty Wrecker Body.

The Stellar (formerly American Eagle) egg crate divider kit are built to fit Stellar drawer systems.

Optional 48" Shelf Kit with two dividers for 48" Aluminum Tunnel Toolbox on aluminum heavy duty wreckers.

This is the RC replacement toolbox door with the new latch with a black base.

Zip's Custom Standard Toolbox Half Shelf Kits are an easy way to optimize the dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. These standard half shelf kits get bolted to the inside of the toolbox. All necessary mounting hardware is included with these standard half shelf kits. They are made from high quality .125" thick aluminum. These standard shelf kits not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x4' Sheets. Also available in 1'x1' Tiles and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

This Miller Industries shelf kit includes 3 adjustable shelves.

Introducing the second generation of our toolbox Box Top Tray lineup! These bolt-together Box Top Trays ship and store in a much smaller space. This also allows us to offer replacement parts in case a portion becomes damaged. All these ITD Box Top Trays now come with dividers. Giving you the choice to use them, keep them open, or install them later.

Zip's custom center console floor toolbox is designed specifically for Freightliner M2's. It has the ability to store a 2.8 oz. or 5lb. fire extinguisher, TM22G 22" wireless light bar, J & C 660 and other similar jump packs, and a Milwaukee impact and charging station. Truck Freight Ship Direct Only

These Seamless Toolbox Mats by Miller Industries are a great addition to your toolbox to get that great custom look. Not only do they look amazing but they are also very functional. These mats will help keep your towing tools and accessories from sliding around and scratching and damaging the inside of your toolbox. These mats are 12.5' long by 4' wide and are available in 5 different colors. They are available in: Black, Blue, Yellow, Red, and Green.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. These corners are 2"x2" and are sold as a pack of 4. Also available in 1'x1' Tiles, 3'x4' Sheets, and 3'x12' Rolls. Complete your area with the Dri-Dek edge pieces to smooth and round out your full body mat.

This is a shelf kit for a 36" or a 48" toolbox.

Phoenix Stainless Steel Dress Plate for Top-Mount Tray ToolBox.

This 16" Storage Tray from In The Ditch is perfect for storing just about anything. It comes with 6 slots and 4 moveable snap in dividers. It is great for separating and storing screws, nuts, and fittings.

These are C Tech Manufacturing drawer system 2" Risers. They help give your box that extra bit of height to clear door openings and give you full access to that botom drawer.

These aluminum wall hooks from In the Ditch are a versatile and easy option to organize your truck, shop, garage, or trailer. These hooks are offered in 3", 5" and 7" lengths. The heavy duty aluminum alloy construction gives these hooks a structural rating of 100 lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surface. All of the necessary hardware is included to make installation quick and easy.

This is a Zip's custom tray for

Slide 1/4"-20 hex head bolts anywhere along the slotted track for use as hangers. Bolts are sold separately. T-slotted track is also used to position clamps and jigs on workbenches and table saws. Track is clear-anodized aluminum. Mounting holes are on 3" centers and require No. 8 pan head screws.

Note: Special Handling Fees Apply

This Tunnel Box Shelf Kit from Miller Industries is for a 30" Tunnel Box. Chains, rack, and attachments are all sold separately.

Shelf Kit for FI & 6500 Century as well as Vulcan 880/890 Series.

This is RC Industries .100 smooth aluminum unassembled toolbox box top tray. 

Built for medium to heavy duty trucks, Buyers Products Heavy Duty Diamond Tread Aluminum Step Box provides framed steps with convenient built-in storage space. The durable design incorporates a smooth aluminum body with a diamond tread aluminum door for great stability and looks. A die cast, locking T-latch and single rubber D-bulb door seal help keep your tools protected from weather and theft. Corner gussets and a continuous hinge on the door opening provide extra strength. Available in multiple sizes to suit a variety of applications.

Toolbox Drawer Divider Kit. This Divider is 19.5" x 13".

This is a light bar for the Stellar (formerly American Eagle) drawer systems. There are three different options to choose from. When ordering these light please use the drawer width to assure to purchase the right fit for your drawer system.

Dividers maximize flexibility and keep contents organized.