Tow Light Parts & Accessories

These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet. It provides your TM-MAG90 magnet with a reliable scratch proof mounting option for your wireless tow lights.

TowMate Towlight Standard (6') cigarette lighter charge cord charges any TowMate wireless light that has the small silver DC charging port.

Extension tow light cable assembly for use with tow light bars or as an extension for those "long loads." Use with tow light bar part number(s) 1100, 1100P, 1110, and 1100P-48.

Replacement sealed lead acid battery for standard heavy duty Towmate Wireless Tow bars- Fits TM36/ TM48.

This is a Zip's Custom Towlight Hanger Bracket. You are able to store your towlight when it is not in use. With this bracket you are able to customize your toolbox by efficiently utilizing the space in your toolbox. This towlight hanger bracket is designed to be used on the heavy duty wreckers.

This Suction Cup Kit from TowMate provides you with a conversion from magnetic to suction cup base for tows requiring you to mount to a non-magnetic surface. These fully adjustable suction cups provide a solid hold with their press-and-lock base.

Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.

Replacement sealed lead acid battery for Towmate Wireless Medium Duty Tow bars for SPR16/SPR25/TM25.

Replacement rotator assembly for the Quad rotator light bar. Bulb not included.

Extension tow light cable assembly for use as an extension for those "long loads."

This powerful 105 lb. pull magnet is all you need to secure your wireless tow light to the load you are hauling. It comes with a protective rubber layer to ensure that the magnet will not scratch the vehicles finish while in use.

3-Pin Delphi Connector for M63123 Series Side Turn/Marker Light from Panor Corp.

Replacement round magnet assembly for the ZIP-10 or ZIP-10LED tow lights which use the rubber housing truck-light style bulb. This is a 90 lbs. pull magnet and includes the 3-1/8" magnetic base and an attached bracket.

This replacement Stop, Turn, Tail LED Lens is used on

Extension tow light cable assembly with male plugs on both ends. For use as an extension for those "long loads."

This Standard 6-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

This is a stick on pad that goes on the bottom of the 100 lb. magnets on your tow lights from TowMate. This pad helps prevent scratches and other damage from the tow light.

Vinyl covered metal pads allow your magnetic base tow lights to be used on a vehicle with aluminum or composite hoods, deck lids, or body panels. Secure by closing window, door, or deck lid. May be used with Zip's tow lights part numbers SL-9, ZIP-10, or ZIP-10LED.

Charge your battery quickly and safely with this automatic "smart" charger. This Wall charger will never harm or over charge your battery. Keep your battery conditioned with the float mode; once the battery is fully charged, the charger starts float mode which provides a small amount of current to keep your battery healthy and ready to provide you hours of power.

These powerful 100 lb. pull magnets from TowMate are all you need to secure your wireless tow light to the load you are hauling. Fitted with a protective rubber layer, these magnets will not scratch the vehicles finish while in use.

This replacement Stop, Turn, Tail LED Lens is used on

This replacement Stop, Turn, Tail LED Light from TowMate is for the

Durable Poly Housing from TowMate that fits

Option of round to blade or blade to round converter to fit your needs. Convert your socket with this adapter to make your tow light multi-purpose.

60' 7 way cord for 36" yellow tow light bar part number

This heavy duty carrying case is for your TM2 Tow Light. It is made from durable nylon webbing that will provide you years of protective service.

This 16" LED Strip from TowMate is used on

This new style 7-Pin hardwire plug Transmitter from TowMate.

3-Pin Helix 1-1/2 turn Strobe Tube, Plug-in, VP420 Series, VP422 Series, 2022, G5 & G7 Series.

TowMate I mon reminder (lithium bars).

Replace your existing lithium battery or upgrade your TM22 wireless tow light to lithium power with the XR Upgrade battery replacement kit. Simply remove your existing battery and replace with the BAT-XR-LD and enjoy the benefits of 50+ hours of operation on a single charge! Additionally, these batteries can last up to 10 years. (operates with existing charge cord)

Maxxima headlight load equilizer modules. Will work with 4" x 6" and 7" x 5" lights.

Upgrade your TM22 wireless tow light to include side illumination with this easy-to-install retrofit kit. Bring your tow light to full compliance in regions where side marker lights are enforced for temporary lighting.

Slow moving agricultural equipment is always a significant road hazard and especially when light conditions are not optimum. With the Lite-It Agricultural Wireless Tow Lights, this hazard can be reduced on all farm implements. Our farm light bar uses the most recent technology to provide maximum site distance plus it is constructed from virtually indestructible polyethylene casings. These two independent light bars can be attached to any steel surface using 120# pull magnets. Each bar has full stop, turn signal, taillight and side marker functions plus 2.5. Each set comes with a seven pin flat blade style wireless transmitter and a 12v cigarette lighter charger.

This is a cap and wire for spliced sections used with parts EW0110-EW0118.

This black wireless module replacement antenna can be used with EC1000-WMK, EC5605-WM, EC2014-WC, EC2027-WC and EC7008-WM Series.

Our wireless light bar monitor kit that lets you know the your light bar s battery strength and status. If you leave your light bar behind, a red LED lights up and a 96 db alarm sounds. Don t lose track of your wireless light bar and protect your investment. Works with all of the LIW wireless bars except the LIW-1. **This unit it to be ordered at time of purchase of light bar. It is specific to each individual light bar purchased by use of serial numbers.

Replacement handle for Towmate Towlights

Lithium battery replacement for TowMate light duty Li Series wireless light bars. The lithium battery offers over 18 hours per charge with the heavy duty 2200mah lithium battery pack. Easily removable and rechargeable, you can carry a few Li batteries for those cross country hauls and never be without tow lights.

24-Volt to 12-Volt Step Down Module by Maxxima, 2 Amp load and 4 blunt cut leads. Maxxima's new step down technology allows installation of 12-volt lighting on 24-volt vehicles, this convenient and simple accessory is 2 amp rated allowing you to run multiple 12-volt lights on one module, contingent on their amp draw.

This black wireless module converts EC5603-K and EC7003-K to wireless.

This wireless module remote antenna can be used with the EC5605-WM, EC7008-WM, EC2014-WC, EC2027-WC Series.

When towing a vehicle, not all are made of metallic surfaces. This is a problem when all you have to work with is a magnetic tow light. Luckily, SafeAll offers an easy and reliable suction mount conversion kit. The SafeAll Tow Light Suction Mounts come with a magnetic surface and a suction mount, so you can always count on your tow light to get the job done.

This power, trigger, transmission harness can be used with the M7000B monitor.

Configure different outputs, patterns and phases to customize your light bar to your needs. light bars are thermally protected and reverse polarity protected. Feature an aluminum base and UV-stabilized polycarbonate lenses. Includes 15'L power harness and permanentmount kit.

This light source component safety director (A,B,C,R) can be used with the ED3300 Series.

The 1/2 black lens cover is used with the 6550, 6650, 6710, 6750. 7930, 7945, 7965 and 7975 Series.

Upgrade your TM22 wireless tow light to include side illumination with this easy-to-install retrofit kit. Bring your tow light to full compliance in regions where side marker lights are enforced for temporary lighting.

Durable Poly Housing from TowMate that fits

This sensor kit components reversing sensor system includes all components: EC-CB04, EC1005, EC-RS04 and PC-1004.

This 15 foot cigareete cord and plug can be used with the 5350-VM Series.

This branch guard can be used with the 6200 or 6400 Series.

This black DVR connection cable can be used with any current ECCO camera.

This is a daytime running light module that drives a headlight to create a daytime run light (DRL) mode of operation for vehicles that are not equipped with DRL control. this enables the use of VHL-5X7DRL drl function on many vehicles.

The M50917 Daytime Running Light modules drives a headlight to create a daytime run light (DRL) mode of operation for vehicles that are not equipped with drl control. This enables the use of VHL-4X6DRL DRL function on many vehicles.