Snow Removal, Dump Bodies, & Lift Gates

Buyers Products SaltDogg Bulk Salt Walk Behind Broadcast Spreader features a bulk flow gate to handle bulk salt. That gives contractors, facilities managers, and property owners the ability to use the bulk salt that is used with the rest of their spreader line-up with the walk behind. The manual spreader broadcasts material up to 24 ft. The enclosed gearbox with commercial grade alloy gears and an integrated grease fitting ensure that the moving parts of the spreader are out of the elements and are easy to maintain for years to come.

Dimensions: 40.5"H x 22.5"W x 20.5"D. Capacity: 4.413 cubic feet/331 pounds #1 rock salt or similar material.

53" Electric Polymer Salt and Sand Spreader, Dimensions; 53 x 48 x 28, Capacity; 0.75 cu. yds., Weight; 280 lbs, Screw Type Auger Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 5-30 feet, Standard Chute, Recommended Use; Utility Vehicles, 1/4-Ton, 1/2-Ton & 3/4 Trucks

96" Gas Slide-In Spreader, Dimensions; 113" x 47" x 32.5", Weight; 945 lbs., Conveyor Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 2-30 feet, Standard Chute, Recommended Use; 3/4 or 1-Ton Trucks

This is a SnowDogg moldboard for EX80II, EX85II, or EX90II.

Wall extension bracket kit for 8' & 6' steel inserts (hardware and 2 brackets per side), accepts one 2" x 12" per side.

The most cost-effective commercial grade spreader to maintain large commercial grounds. Dimensions:45.7"H x 29.7"W x 30.3"D. Attractive and rugged polymer black hopper and orange powder coated steel mounting frame to resist rust and corrosion. Heavy-duty 12-volt spreader is housed in a sealed motor chamber. Material flow and spreader and spreader width, from 3ft. to 30ft. are controlled from an in-cab electronic spreader control panel. Ultra-smooth hopper interior, in addition to the auger design, provides for easy material flow and reduced material "bridging".

53" Electric Polymer Salt and Sand Spreader, Dimensions; 53 x 48 x 28, Weight; 289 lbs, Screw Type Auger Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 5-30 feet, Extended Chute, Recommended Use; Utility Vehicles, 1/4-Ton, 1/2-Ton & 3/4-Ton Trucks

Buyers Products Cab Guard is designed to work with steel and stainless steel DumperDogg inserts. They bolt on to the DumperDogg and protect against debris, loose material, and other objects that could damage your back window.

One piece fully-welded carbon steel frame. Large 13" pneumatic tires make pushing through slush and ice a breeze. Adjustable spreader path from 3ft. - 30ft. Large flow regulator on handle offers ease of operation. Solid control linkage eliminates sticking and stretched cables. 3-flap adjustable poly deflector controls spread pattern (ideal for sidewalks near sensitive foliage, etc.). Additional fixed rear deflector protects operator's feet. Ergonomic handle. Expanded metal hopper screen helps prevent material jamming. Includes a durable, double stiched plastic rain cover to protect from, moisture and spillage. Heavy-duty stainless steel gears for added strength.

These SaltDogg Spreaders by Buyers Products are designed for dump bodies and flatbeds with a minimum GVW of 13,000 lbs. They are available with 96", 108", or 120" stainless steel hoppers with a capacity from 3.5 to 5 cubic yards. These spreaders can come equipped with a Gas Engine, Electric Motor, or a Hydraulic Motor depending on what works best with you intended application. The gas powered spreaders come with a 10.5 HP Briggs and Stratton engine with an included battery for electric starts. The electric powered spreaders come with two independent electric motors, one for the conveyor and one for the spinner. The hydraulic powered spreaders come with two motors for conveyor and spinner operation. These spreaders work great with bulk salt, bulk sand, or a salt and sand mixture. These are quality spreaders that are made here in the USA.

Wall extension bracket kit for 8' & 6' steel inserts (Hardware and 2 brackets per side), accepts one 2" X 12" per side.

Buyers Products SaltDogg Cubic Yard Gas Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand Its. The spreader combines the power of a gas engine with modern spreader conveniences. mix.

Buyers Products DumperDogg Dump Insert transforms your pickup truck into a dump truck, making it easier to transport and unload heavy, loose material such as mulch or stone. Built from 12 Gauge steel, the insert will fit either a 6 ft or an 8 ft domestic truck bed on 3/4 ton and higher pickups. Each insert has a payload capacity of up to 6,000 lb.

Buyers Products DumperDogg Polymer Dump Inserts from Buyers Products transform your pickup truck into a dump truck, making it easier to transport and unload heavy, loose material such as mulch or stone. Built from double-walled, dent and rust-proof polymer, the inserts fit an 8 ft domestic truck bed and have a payload capacity of up to 6,000 lb.

DumperDogg Series-Power Up and Down, 1.5KW Motor (3 HP Max) For Hydraulic Pump, 6,000 lbs. Max, Dump Angle 0-45 Degrees, Includes Manual Safety Bar, Tethered Control Box w/ 9'Cord, Grease Fittings/ Holes in Pivot Pins, Includes Body Up Indicator Kit(SK10), 20' Battery Cables, Tailgate Chains, Black Powder Coat Structural Steel Frame, Double Pivoting and Removable Steel Tailgate, 3/4" Diameter Tailgate Hinge Pins.

This is a SaltDogg TGS Series Vibrator Kit.

96" Electric Stainless Steel Slide-In Spreader, Dimensions; 113 x 47 x 33, Capacity; 2.0 cu. yds., Weight; 750 lbs, Conveyor Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 2-30 feet, Adjustable Chute, Recommended Use; 3/4 or 1-Ton Trucks

These SaltDogg Spreaders by Buyers Products are designed for dump bodies and flatbeds with a minimum GVW of 26,000 lbs. These spreaders are hydraulic powered and have a 24" wide chain conveyor drive. The 18" poly spinner broadcasts up to 30' when used with a height adjustable chute. These spreaders are built from a quality 304 stainless steel construction for optimum corrosion resistance. The inverted V design reduces stress on the drive line and improves flow. These spreaders feature a heavy duty 3/8" hinged top screens with 2-1/2" openings. The hydraulic spreader controls are sold separately with a variety of options available. These spreaders are made here in the USA. The options of these spreaders include 6 through 16 cubic yard capacity with 6:1, 25:1, or 50:1 gear box ratios making it easy to get the right spreader for whatever kind of job you have to do.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 105-gallon polymer reservoir (69"L x 20"W x 25"T). 12-volt, 3 GPM/45 PSI electric diaphragm pump. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

Direct Drive Under Tailgate Spreader. Dimensions; 98" x 19" x 17". Weight; 510 lbs. Screw-Type Auger Feed Mechanism. 18" Polymer Spinner, spread width; 5-30 feet. Recommended Use; 3/4 and 1-Ton Trucks.

Stainless steel construction throughout.

These SaltDogg Electric Conveyor Chain Spreaders by Buyers Products are designed for dump bodies and flatbeds with a minimum GVW of 26,000 lbs. They are available with 120" or 144"stainless steel hoppers with a capacity from 7 - 9 cubic yards. These spreaders come standard with a 12 VDC powered electric drive with independent conveyor and spinner motors. These spreaders work great with bulk salt, bulk sand, or a salt and sand mixture. These are quality spreaders that are made here in the USA.

Direct Drive Under Tailgate Spreader, 5:1 Reduction Ratio Gearbox, Dimensions; 98" x 19" x 17", Weight; 405 lbs., Screw-Type Auger Feed Mechanism, 18" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

This is a SaltDogg TGS Series Vibrator Kit.

This is a 6'or a 6'8" Straight Plow most utility vehicle manufactures. Some of these manufactures include Bobcat, Case, Club Car, Husqvarna, John Deer, Kubota, New Holland, and Polaris. This plow features 14 gauge brush finished, 304 stainless steel. It uses 4 gauge wire for the power wires. This straight plow has a weight optimized design to work with most full-size UTVs. It has an aggressive flare for moving snow. This plow is narrow, has an angle for tight spaces. It has a simple torsional trip edge design for smooth plowing.

Stainless Steel Direct Drive Under Tailgate Spreader. Dimensions; 98" x 19" x 17". 15" Side Pill Plates. Weight; 392 lbs. Screw-Type Auger Feed Mechanism. 18" Polymer Spinner. Spread Width; 5-30 feet. Recommended Use; 3/4 and 1-Ton Trucks.

The SnowDogg VMDII and VXFII series plows let you plow, clear, scrape, and back drag through even the biggest storms. These are ideal snow plows for trucks like the Ford F-150 and F-250, RAM 1500 and 2500, and the GMC/Chevy 1500 and 2500 models. These new VMDII and VXFII Plows offer a floating A-Frame, Quick Mount II, Moldboard, Trip Action, lift and angle cylinders to improve the overall performance of these plows. The new tubular steel floating A-frame features a sliding pin connection. This makes the plows less sensitive to mount height, and easy to align. The sliding pin connection lets the plow contour the road for a clean clear, and helps avoid uneven edge wear. The new design increases ground clearance 20% over previous models. One of the most useful benefits of the Gen II series plows are there is no need for a plow jack with the Quick Mount II. The plow's integrated swing down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With this system just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands. There is now a new upgraded LED headlight option for the VMDII and VXFII Series plows. The SnowDogg Illuminator LED Headlights are brighter and longer lasting than traditional halogens. Active defrosting technology keeps the illuminator's ice free even in the biting cold. A central heat source defrosts the entire lens evenly, preventing the streaking or banding that's common with other LED plow lights.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

In-Bed Liquid Spray Kit, 2" Hitch Mounted, 12 VDC, 28 Amps Maximum, 335 Gallon Poly Reservoir, Stainless Steel Pump Housing, 160 lbs., One Person Installation

This heavy-duty skid-steer plow has three different lengths to choose from 7.5ft , 8 ft or 9ft long. It comes with an universal skid-steer mount and works with the existing hydraulics. It features a swiveling A-Frame that follows the contour of the road and has a trip edge design. Deflector and shoes come standard.

Have you ever wanted the reliability of the SnowDogg Plow in a Utility Vehicle application? If so, this is the plow for you. This is a 6.5' V-Plow for most utility vehicle manufactures. Some of these manufactures include Bobcat, Case, Club Car, Husqvarna, John Deere, Kubota, New Holland, and Polaris. This plow features 14 gauge brush finished, 304 stainless steel. It uses 4 gauge wire for the power wires. This v-plow has a weight optimized design to work with most full-size UTVs. The SD-VUT65 comes standard with double acting cylinders for locked back dragging option. It has an aggressive flare for moving snow. This plow is narrow, measuring just 60" when it is in the "V" position, making it perfect for tight spaces. It has a simple torsional trip edge design for smooth plowing.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. (2) 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

These SaltDogg Spreaders by Buyers Products are designed for dump bodies and flatbeds with a 13,000 lb GVW. They are available with 96", 108", or 120" hoppers with a capacity from 2.5 to 3 cubic yards. Theses spreaders can come equipped with a Gas Engine, Electric Motor, or a Hydraulic Motor depending on what works best with your intended application. The gas powered spreaders come with a 10.5 HP gas engine with convenient electric start and throttle control. The electric powered spreaders come with two independent electric motors, one for the conveyor and one for the spinner. The hydraulic powered spreaders come with two independent motors for independent conveyor and spinner operation. These spreaders work great with bulk salt, bulk sand, or a salt and sand mixture. These are quality spreaders that are made here in the USA.

Stainless Steel Electric Drive Under Tailgate Spreader, Dimensions; 99" x 22.5" x 17", Weight; 575 lbs., Screw-Type Auger Feed Mechanism, 14" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

Buyers Products DumperDogg Stainless Steel Dump Insert transforms your pickup truck into a dump truck, making it easier to transport and unload heavy, loose material such as mulch or stone. Built from 12 Ga stainless steel, the inserts will fit either a 6 ft or an 8 ft domestic truck bed on 3/4 ton and up pickups. Each insert has a payload capacity of up to 6,000 lb.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

MD Series "SnowDogg" Snowplow, Typical Applications Include 1/2-Ton and Light-Duty Trucks, And SUV's. These new MDII plows include Covered Power Unit, a floating A-Frame, QuickMount II, Moldboard, Trip Action, lift and angle cylinders to improve the overall performance of these plows. The new tubular steel floating A-frame features a sliding pin connection. This makes the plows less sensitive to mount height, and easy to align. The sliding pin connection lets the plow contour the road for a clean clear, and helps avoid uneven edge wear. The new design increases ground clearance 20% over previous models. One of the most useful benefits of the Gen II series plows are there is no need for a plow jack with the QuickMount II. The plow's integrated swing down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With this system just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands.

There is now a new upgraded LED headlight option for the MDII Series plows. The SnowDogg Illuminatior LED Headlights are brighter and longer lasting than traditional halogens. Active defrosting technology keeps the illunminators ice free even in the biting cold. A central heat source defrosts the entire lens evenly, preventing the streaking or baqnding thats common with other LED plow lights.

• SnowDogg MD GEN II Series
• Stainless Steel Moldboard with 3/8" Cutting Edge
• Floating A-Frame
• QuickMount II Mounting System
• Standard Shock Kit, Cast Shoes, Snow Deflector, and Blade Guides
• Available Headlight Options: Standard Halogen or LED Upgrade
• Standard Shock Kit, Cast Shoes, Snow Deflector, and Blade Guides
• Moldboard Lengths: 6'8", 7.5', 8'


Available in the following sizes



Item #	Length	Light Option
SD-MD68II	6'8"	Standard Halogen
SD-MD68IILED	6'8"	LED Upgrade
SD-MD75II	7'6"	Standard Halogen
SD-MD75IILED	7'6"	LED Upgrade
SD-MD80II	8'	Standard Halogen
SD-MD80IILED	8'	LED Upgrade

DumperDogg Stainless Steel Bolt-On Cab Guard designed to protect your back window from debris and other objects when used with DumperDogg stainless steel inserts. Use with landscaping, construction, contractor and agricultural vehicles for safety and protection.

The SnowDogg HD Gen II series plows gives contractors a commercial grade snow plow that has been weight optimized to work with smaller trucks. These new Gen II HD Plows offer a floating A-Frame, QuickMount II, Moldboard, Trip Action, lift and angle cylinders to improve the overall performance of these plows. The new tubular steel floating A-frame features a sliding pin connection. This makes the plows less sensitive to mount height, and easy to align. The sliding pin connection lets the plow contour the road for a clean clear, and helps avoid uneven edge wear. The new design increases ground clearance 20% over previous models. One of the most useful benefits of the Gen II series plows are there is no need for a plow jack with the QuickMount II. The plow's integrated swing down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With this system just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator.

The flagship SnowDogg EX Gen II series gives you the plow you need, storm after storm. If you are searching for a reliable straight blade plow, with rugged components, a stout build, and countless new features, look no further. These new Gen II Ex Plows offer a floating A-Frame, Quick Mount II, Moldboard, Trip Action, lift and angle cylinders to improve the overall performance of these plows. The new tubular steel floating A-frame features a sliding pin connection. This makes the plows less sensitive to mount height, and easy to align. The sliding pin connection lets the plow contour the road for a clean clear, and helps avoid uneven edge wear. The new design increases ground clearance 20% over previous models. One of the most useful benefits of the Gen II series plows are there is no need for a plow jack with the Quick Mount II. The plow's integrated swing down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With this system just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SCH series spreaders.

These replacement tailgate spreaders from Buyers Products are designed to fit in place of the tailgate on a 1 ton super duty dump body. They have a 6" auger and are made from 304 stainless steel construction. These spreaders are ideal for dump bodies with low ground clearance. These spreaders are available with center or driver side discharge and available with electric or hydraulic power options. These spreaders have an 18" poly spinner that casts material with 25'. These are quality spreaders that are made in the USA.

The SnowDogg TEII series Trip Edge plows are no match for rough roads, hidden obstacles, bumps and cracks. These new TEII Plows offer a floating A-Frame, QuickMount II, Moldboard, Trip Action, lift and angle cylinders to improve the overall performance of these plows. The new tubular steel floating A-frame features a sliding pin connection. This makes the plows less sensitive to mount height, and easy to align. The sliding pin connection lets the plow contour the road for a clean clear, and helps avoid uneven edge wear. The new design increases ground clearance 20% over previous models. One of the most useful benefits of the Gen II series plows are there is no need for a plow jack with the QuickMount II. The plow's integrated swing down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With this system just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SHPE1500/2000 series spreaders.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SCH series spreaders.

CM Series "SnowDogg" Commercial/Municipal Snowplow, Typical Applications Include Medium Trucks 14,000 to 27,000 G.V.W.R., Integral Hydraulics Or Central Hydraulic Option, Quick Attach/Detach Foot Pedal Mounting With Adjustable Jack Mechanism, Super Bright Plow Lights With Double Stud Mounting, Standard 5/8" Replaceable Cutting Edge, Brushed Stainless Steel Moldboard, Standard Cast Iron Plow Shoes, Super Duty 12" Belted Snow Deflector, Full Moldboard Trip, Wire Reinforced Fluorescent Orange Blade Guides.

XPII Series "SnowDogg" snowplow. The next generation of SnowDogg expanding wing plow is hear. Extend your blade from 8 feet to a 10 foot scoop at the press of a button. The versatile plow's powerful stacking and windrowing are ideal for quickly clearing large lots. These plows feature the corrosion resistant 304 stainless steel moldboards, which never need paint. A robust frame spreads impact across the blade to reduce wear on vital components. These plows also feature an aggressive 70? attack angle, a full-length 2" cross tube, a heavy duty bottom channel, nine reinforcing 1/4" laser cut steel ribs, and a 1/2" cutting edge with integrated curb guards. These plows can be mounted or taken off in one minute or less with the new RapidLink attachment system. With this new system you will have a center mounted drop foot which props up your plow on any surface with the pull of a handle. It also features hydraulically powered Jack Switch which adjusts your plow's mounting height on the fly so it is easy to line up with your vehicle. These plows connect to your truck with a single driver side foot pedal making mounting a breeze. The tubular steel floating A-frame features a sliding pin connection so the plow contours the ground for a clean, efficient scrape. You will get outstanding performance at any mounting height.