Hydraulic Pumps, Fittings, Hoses & Repair Parts

3/8" H425-6 Hydraulic Hose

The B/A Products hose splice repair kits are perfect for temporary repairs on the roadside. These splice kits will allow the operator to load and unload while avoiding costly road service repairs.

This is a Muncie Tandem Hydrulic Pump (13 GPM)

Note: Special Handling Fees Apply

Lube "T" fitting - required in the oil return cooling line to supply low pressure to the idler shaft of the Chelsea PTOs.

This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2" MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 14" Hose Assembly from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Lube "T" fitting - required in the oil return cooling line to supply low pressure to the idler shaft of the Chelsea PTOs.

This Hydraulic Fitting Connector from Miller Industries measures 8MJ x 8MP and 1/2" SAE x 1/2" JIC. It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century 10, 15, 20, and 30 Series Carriers, Champion Carriers, and Vulcan 10 Series Extreme Angle Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 5/8" x 1/2" Straight Hydraulics Connector from Miller Industries is used on the Hydraulics Assembly of Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300789.

This is a pressure relief cartridge P70 from Century.

CCW rotation

This Hydraulic Elbow Fitting from Miller Industries is used to connect the hose assembly to the bed extend cylinder on Century 10, 15, 20, and 30 Series Car Carriers. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 1/4" x 21" Hose Assembly from Miller Industries is used to connect the Bed Lift Cylinder on the Hydraulics Assembly of several Miller Car Carriers. These include Challenger, Century, Champion, Holmes, and Vulcan carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Pilot Operated Check Valves are similar to normal check valves, except they can be opened from an external pilot pressure. Similiar to standard Check Valves, P.O. Check Valves block flow in one direction.

This Hydraulic Elbow Fitting from Miller Industries is used to connect a hose assembly to the tilt cylinder on the Hydraulics Assembly of Century, Champion, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1/2" x 128" Hose Assembly from Miller Industries is used to connect the bed extend cylinder to your valve spool on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 204" Hose Assembly from Miller Industries is used to connect the winch motor to the valve spool on the Hydraulics Assembly of Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1/2" x 1/2" Connector Coupling from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 80-1/2" Hose Assembly from Miller Industries connects to your valve body on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 137" Hydraulic Hose Assembly from Miller Industries connects the double check valve to the 5 spool valve body on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 3/4" Female Pipe Swivel Fitting from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 3/8" x 18" Hose Assembly from Miller Industries connects the bed tilt cylinder to the bed tilt cylinder on the Hydraulics Assembly of Century 10, 15, 20, and 30 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 18" Hose Assembly from Miller Industries is used to connect the Wheel Lift Cylinder to the Wheel Lift Holding Valve on the Hydraulics Assembly of several Miller Car Carriers. These include Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0301900.

This Hydraulic Tee Fitting from Miller Industries is used on the Hydraulics Assembly of Century, Champion, and Vulcan Car Carriers. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 90? Elbow Fitting from Miller Industries is used on the Hydraulics Assembly of Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the features below for a list of assemblies and see the brochure tab for breakdowns.

clockwise rotation

This Hose Barb Fitting from Miller Industries measures 3/4" x 3/4". It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Challenger, Century, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 52" Hose Assembly from Miller Industries is used to connect the 5 spool control valve to the bed extend cylinder on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 3/8" x 120" Hose Assembly from Miller Industries is used to connect the extend cylinder to the valve spool on the Hydraulics Assembly of Century 10, 15, 20 and 30 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Hose Barb Fitting from Miller Industries measures 1" x 1". It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Can be used for various hydraulic applications

This 46" long Hose Assembly from Miller Industries connects to the bed tilt cylinder and the bed tilt cylinder lock valve. It can be found on the Hydraulics Assembly of Century 20 and 30 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Hose Assembly from Miller Industries is 1/2" in diameter and 58" long. It is used to connect the bed extend cylinder to the valve body on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Champion, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 3/8" x 62" Hose Assembly from Miller Industries is used to connect the extend cylinder to the valve spool on the Hydraulics Assembly of Century, 10, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 242" Hose Assembly from Miller Industries connects the winch motor to the 5 spool control valve on the Hydraulics Assembly of Century 10, 15, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2" MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 3/8" x 1/4" Male Fitting Connector from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Challenger, Century, Champion, Holmes, and Vulcan carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Fitting Connector from Miller Industries measures 8MJ x 8MP. It is used on the Hydraulics Assembly of Century 10, 15, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1" 90? Street Elbow Hydraulic Fitting from Miller Industries connects to the 1" hose barb and suction hose on the Hydraulics Assembly of several Miller Car Carriers. These include Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 3/8" x 1/2" 90? Elbow Fitting from Miller Industries is used to connect the hose assembly to the winch motor on the Hydraulics Assembly of Challenger, Century, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

The Hydra-Kool is an all aluminium, lightweight, compact Cooler/Filter/ Reservoir system. The ideal solution for mobile hydraulic applications where weight reduction is vital to reducing fuel consumption.

Can be used for various hydraulic applications

This 115" Hydraulic Hose Assembly from Miller Industries attaches to your control valve on the Hydraulics Assembly of Century 10 and 20 Series Car Carriers. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 224" Hose Assembly from Miller Industries is connected to the winch motor and the 5 spool control valve on a 20' carriers. It is used on the Hydraulics Assembly of Century 15, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Suction Hose from Miller Industries measures 1" x 96". It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Challenger, Century, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1" Hose Clamp from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 90? Street Elbow Fitting from Miller Industries is used on the Hydraulics Assembly of Century, 10, 15, and 20 Series Carriers, as well as Vulcan 10 Series Carriers. This fitting connects the oil filter to a hose assembly. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This Fitting Connector Bushing from Miller Industries measures 16MP x 8FP. It is used on the Hydraulics Assembly of Century 10, 15 and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 90? Hydraulic Elbow Fitting from Miller Industries is used on the Hydraulics Assembly of Century 10 and 15 Series Carriers, as well as, Vulcan 10 Series Extreme Angle Carriers. The fitting connects one of your hose assemblies to the bed extend cylinder. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 26" Hose Assembly from Miller Industries connects the cylinder lock valve to the tilt cylinder on the Hydraulics Assembly of Century 10, 15, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 82" Hose Assembly from Miller Industries is used on the Hydraulics Assembly of Century 10 Series Car Carriers made before 2001. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This 45? Elbow Fitting from Miller Industries is used to connect a hose assembly to the wheel lift lock valve on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1/4" x 1/4" x 1/4" Male Tee Fitting from Miller Industries is used to connect a hose assembly to the wheel lift lock valve on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 1" Hose Barb Hydraulic Fitting is used on the Hydraulics Assembly of Century, Champion, and Vulcan Car Carriers. The Hose Barb gets connected to a Suction Hose and a 90? Street Elbow. See the features below for a list of assemblies and see the brochure tab for breakdowns.