Medium / Heavy Wrecker Parts

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

This is a replacement cable guide bottom assembly for heavy duty wreckers by Miller Industries. This bottom assembly will fit Century 1040S, 1060S, 1075S, 1130/1140, 9055, Challenger 6807/T-50, CH-45, 9909/8808 Rotators, and Vulcan V-100.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

The Omnex 10/14 function remote comes standard with 14 functions programmed. This Omnex remote control for wireless Omnex remote systems is commonly used on heavy duty wreckers and can be used on multiple applications up to 14 functions.

This is a replacement LED tail light retro fit kit by Zip's Truck Equipment. This is a retro fit kit that works on heavy duty wreckers. This kit includes 2 stainless steel tail light brackets, 4 LED red 6" Stop Turn Tail lights, 2 LED white 6" back up lights, 6 oval grommets, 6 3-wire pigtails, 2 LED red 2" round marker lights, 2 black 2" round grommets, and 2 2-wire pigtails.

This welded link is commonly used in conjunction with the cable tie-back springs on Miller Century, Vulcan and Challenger Heavy Duty Wreckers See part numbers:

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 114" long and has a 1" stroke. Please see Features for what models this control cable will fit.

"LED" represents the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 104" long with a 2" stroke. This cable goes between the hydraulic control levers and the valve body. Please see Features for what models this control cable will fit.

Maxxima rectangular clearance light w/ bezel. Mounts with 2 screws. Dimensions: 6.25" long x 1.75" wide.

Improve grip on icy or slippery surfaces on a scotch block, wheel lift or stabilizer spade with this replacment blade from Zip's AW Direct.

This LED Side Light from Miller Industries is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. It will also function as a marker light and flasher light when used with a Flasher Control Power Unit (not included).

38" Extreme 3" Aluminum Aero Dynamic Pylon. Does Not Include Wrapper or Whelen H700 LED Side Lights. This pylon does include 3 marker lights and 2 stop tail turn lights.

Tail Board Remote Switch Panel from Miller Industries. This Tail Board remote is water-proof for Controlling Underlift Functions.

This is a replacement retainer pin assembly for the Century 3224 medium duty wrecker by Miller Industries. This pin is used to hold on the fork adapters on to the wheel lift crossbar.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents. Available in Amber and Red.

This LED Side Lamp from Miller Industries can be used in place of the docking light 124002717 for wheel area and side applications. The side lamp is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light.

This LED Side Lamp from Miller Industries can be used in place of the docking light 124002717 for wheel area and side applications. The side lamp is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light.

Safety Chain Roller Kit for All Large Miller Wrecker Bodies Excluding Rotators.

This low pull D-Ring Kit is for a Diagonal Rear Jack-Leg for all Century Heavy Duties. D-Ring Kit includes two d-rings.

This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the brochure tab above. This part can be used to replace part number 12-0306776.

This is a color control handle kit by Miller Industries. This kit includes enough colored handles to do both sides of a large unit from a 4024 through a 6-winch rotator.

This is Jack Up and Down Control Knob from Miller Industries. It is used on Control Assemblies of many Miller Wreckers that use a Jack control. These wreckers include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 96" long. Please see Features for what models this control cable will fit.

This is a Boom Lock Kit for a Holmes 600 & 750 Wrecker. This Pin is used to hold the 2 booms together. You can pull this pin to unlock the 2 booms and rotate the booms to the side if you have a side pull situation. This kit includes a plunger pin, spring, and pull grip handle assembly.

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

"LED" represents the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

Zip's Custom Hydraulic Rear Stiff Leg Kit. Designed for add-on installation on 12 ton or smaller light wreckers. Will fit on either conventional or self-loading small wreckers. Zip's custom legs features a compact design with an extra wide flipper foot. The kit includes hydraulic legs, flipper foot, built in tie-back anchor, low pull D-ring, electric control valve, wired lanyard controller. *Mid-Leg D-ring is available but NOT included in kit.

Innovative Lighting's 50 watt, 12 volt replacement bulb. Commonly used as a 580 series docking/hull light for watercraft.

Replacement Blade, wheel lift spade and stiff leg. 16" long with 4 mounting holes.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Vulcan 896 and 897 medium-duty wreckers. Also known as a tire restraint or wheel retainer, this adjustable 2" x 3" L-Arm fits the outer crosstube (Part No. 12-4008002). This adjustable L-Arm offers a capacity of 6,000 lbs. as a pair and is angled in and down more for clearance on smaller vehicles.

Miller Industries Mounting Pin for the Heavy Duty D-Ring (Part #12-0719585) Used On Century, Vulcan, & Challenger Integrated and Rotator Heavy Duty Wreckers.

This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.

This is a replacement LED tail light retro fit kit by Zip's Truck Equipment. This is a retro fit kit that works on heavy duty wreckers. This kit includes 2 stainless steel tail light brackets, 4 LED red 6" Stop Turn Tail lights, 2 oval grommets, 4 3-wire pigtails, 2 LED red 2" round marker lights, 2 black 2" round grommets, and 2 2-wire pigtails, along with 4 reflective rectangular red decals.

This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a 1-3/8" pin size diameter.

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

This 3 Spool Control Valve from Miller Industries is used on the Hydraulics Assemblies of several Heavy Duty Wreckers. These include Century and Challenger Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

These are bolt on aluminum tube pylon wings for heavy duty aluminum tube pylons by Miller Industries. These new style wings are designed to replace the composite pylon wings. They bolt to the side of your aluminum pylon and provide a nice, clean mounting platform for additional lights. Sold as a set which includes both the left and right wings.

This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This Miller replacement grader blade set is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055. Kit includes 2 blades and mounting hardware.

This is a replacement shaft that attaches the boom end sheave to the boom end swivel weldment on Century and Challenger heavy duty wreckers by Miller Industries. This is the shaft the sheave spins on while the winch cable goes in or out. To see which models this shaft fits see Features below. To view the part schematics click on the Brochure tab.

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

This Boom Fold Cylinder from Miller Industries is used on the Underlift Assembly of Century and Challenger Wreckers. Seal Kit is

Miller Industreis crossbar die spring spacer for HD wreckers. Click on the brochure tab to see the part schematic of this item.

This is a replacement Parker 4 spool valve for heavy duty wreckers by Miller Industries. This 4 function valve works with most Century and Challenger medium and heavy duty wreckers. Common uses for this valve are to run your winch function, recovery boom function, and rear spade function. To view which specific models this valve will work with please see Features below. To view part schematics click on the Brochure tab above.

This is a 3/8" male connector by Miller Industries. It is commonly used on the hoses on a Vulcan V-40 Wrecker.

Holmes Mounting Pin for the Heavy Duty D-Ring on 750 & 850 Wreckers. Designed to be used with D-Ring (Part #MM-12B). Cold rolled shaft with Dimensions of 8 1/2" x 1 3/8".

These are a pair of Whelen Micro-Edge Pod LED lights through Miller Industries. These lights are sold as a pair and include mounting brackets. These pod lights measure 10" x 8". These lights feature a 2 head amber LED's with a clear lens.

This is a replacement boom lift cylinder upper pivot pin for the Century 7035, 9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

The Motec female 9-pole round socket has a universal application.

The "Ground Penetrating Plate" Is Designed To Be Used On Front Foot of Rotators or XPs, and On The Rear Spades Of Century Integrated and HD Fixed-Boom Units. The Sole Purpose Of The Single Pad Is To Dig Into Asphalt, Ice, Etc. Field Testing Has Proven It To Be A Valuable Tool In These Conditions.

Note: Special Handling Fees Apply

This is a swivel boom assembly for Century 1140, 1130, 5030T35, and 7035 fits either side from Miller Industries.

• Fits Century 1140 & 1130/ SDU4 & LDU, 5030T35, 7035 2-speed wreckers either side

This is a lower lift cylinder pin weldment from Miller Industries.

This is a Boom End Yoke for a Holmes 750 Wrecker.

This Seal Kit from Miller Industries is used as a replacement seal kit for a Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.