Winch Replacement Parts

This is a replacement Parker winch motor from Miller Industries. It is used on the hydraulic assembly of car carriers and wreckers equipped with 8,000 lb. winches. This winch motor is commonly used on hydraulic worm winches, such as Ramsey Winches. This motor is used on Century, Chevron, Champion, Challenger, Holmes, and Vulcan Car Carriers. It is also used on Century, Challenger, Champion, and Eagle light duty wreckers. To view what specific models this winch motor will fit, See Features below. To view the part schematics, see the Brochures tab.

This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century, Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch. This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16 Series LCGs. This roller fairlead is designed to reduce cable wear, especially on sharp angle pulls. To view specific models of carrier this fairlead will fit see Features below. To view part schematics click on the Brochures tab.

This is a replacement air bag used on DP winch tensioners on all DP Winches.

Use this Winch Level Winder to tightly respool your unloaded cabled onto the cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope from kinking, backlashing and birdnesting by putting constant tension against the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.

This is a replacement stage 3 carrier assembly in the winch. This replacement carrier fits a 9 Series Warn Winch.

This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This is a warn winch 8" tension plate from Miller Industries.

Gasket Kit for the gear box of Holmes 480,500,600, and 750 wreckers.

This Warn Industries cable tensioner plate fits 8" drum.

This 18 Tooth Chain Drive Socket is used on Holmes 500, 600, and 750 trucks.

These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.

This is a carrier, stage 2 and series 9.

Keep wire rope wound tightly and neatly on the winch drum with this Wire Rope Tension Kit. Designed for all industrial winches with 10" drums, this kit prevents wire rope tangling and assists in uniform wire rope spooling. Installation is fast and easy.

This is a replacment warn roller 8".

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

Replacement Ring Gear for a Series 9 Winch by Warn Industries.

Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey 8,000 lb and 10,000 lb worm gear winches.

This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.

Ramsey Winch manual shifter assembly for RPH-12000 and RPH-15000 winches.

Sprocket, 28 tooth for Holmes 480,500,600, and 750

This is a sun gear, it is series 9.

This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000 lb. winches from Ramsey. The tensioner keeps constant pressure against your winch drum, making your wire rope wind smoother. It's also very easy to install and it keeps your cable from free spooling.

Ramsey Winch level winder for Model 400 Ramsey Winch. The level winder is used to help prevent winch cables from bird nesting on the winch drum.

This is a replacement S/P Disc Brake. This replacement brake fits a 9 Series Warn Winch.

This Cable Tensioner is designed for rear mount winches with a 6"-7" wide drum. The tensioner guides wire rope evenly and tightly back into your winch drum.

Prevent damage to the sidewalls of your front mount winch! This rugged bolt-on roller fairlead keeps wire rope wound evenly on the drum while preventing damage to the side walls of the winch.

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

This is a replacement hydraulic winch motor that runs the hydraulic assembly on most light duty modular wreckers equipped with 8,000 lb. winches from Miller Industries. This hydraulic motor is 4 cubic inches and is commonly used with 8,000 lb. winches. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.

Zip's Custom Winch Free Wheel Lever Extensions. These extensions are designed specifically for the Century 2465 and Vulcan V-24 12 Ton Wreckers by Miller Industries. When mounted on a Medium Duty Chassis the winches are just too tall for most operators to quickly and safely reach the standard winch clutch release levers. Add these extensions and you will be able to easily reach the levers and engage or disengage the free wheel on both winches. Simple to install using the existing lever pins and handle hardware found standard on the winch free wheel levers.

Positive Clutch for Holmes 750,600,500,480 and 440 Holmes Gear Boxes on Wreckers.

This replacement seal kit is used on Parker winch motors commonly found on Century Carriers.

This is a replacement cable tensioner from Mile Marker Industries.

This is a replacement stage 3 carrier assembly in the winch. This replacement carrier fits a 9 Series Warn Winch.

This is a stainless steel plate tensioner rod from Miller Industries.

This Roller Tensioner Kit from Ramsey Winch Company is used on HD-P 8,000 and 10,000 Planetary Hydraulic Winches. It fits a Standard Drum and has Over or Underwound Styles.

Miller dp winch tensioner replacement.

This is a replacement air cylinder for the winch on heavy duty wreckers by Miller Industries. This air cylinder is what lets your winch be able to free spool at the push of a button. This cylinder has a 2" bore and a 2" stroke. To see which models this cylinder fits please see Features below. To view the part schematics click on the Brochure tab above.

A 12" half round rub bar on the tensioner plate for DP Model # 52864 winches and other DP winches with a 12" wide drum.

A 14-1/2" half round rub bar on the tensioner plate for DP winches.

This is a replacement solenoid assembly for a Ramsey winch. This assembly comes with the housing and runs off 12 volts. This solenoid assembly works with the DC-200 & DC-300 Series Winches from Ramsey Winch.

Warn Industries provides a replacement 10" Fairlead roller. Horizontal roller Warn-30867 Vertical Roller Warn-30864

This is the clutch housing for the 12 Series Planetary Winch by Warn Industries. This clutch housing holds all of the ring gears, thrust plates, and carrier assemblies needed to make the winch function. This housing bolts up to the drum support assembly.

These Tensioners prevent Wire Rope from Kinking, Backlashing and Birdnesting by putting constant tension against the Winch Drum.

Make reaching your Century Carriers Clutch Release easy with this Clutch Control Assembly.

A cable tensioner kit for DP winches with a 14-1/2" wide drum.

This is a replacement Char-Lynn motor, 2.8 C.I.

This Miller Industries Cable Tensioner will fit a DP winch on a Century 614 Wrecker with a Formula II Underlift.

This is a single winch clutch release from Miller Industries. The release will allow the operator to slowly and safely release tension on the cable without damaging your winch.

These roller chain half links, also known as offset links, are used to add and additional link to a strand of size 60 chain.

This is a ring gear, it is stage 3 and series 9.

Heavy Duty Roller Fairlead with 4 rollers fits the Ramsey 12,000 RX with a 11" wide drum.

Replacement seal for a Ramsey H-800 winch.