Truck Service Tools

The Tiger Tool axle shaft puller easily removes even the most seized axle shaft in minutes on medium- to heavy-duty Dana, Eaton and Rockwell drive axles. We take details seriously. The head of the driver is rounded, ensuring the load of the hammer s force is more accurately distributed down the center of the tool. Top grade metals and various treatments safeguard the integrity of the driver, enabling it to be struck again and again. Pullcams are preloaded behind the axle flange. The force of the impact shocks the cone washers free, allowing the axle shaft to be released with ease. Pullcams are heat-treated to minimize wear and prevent rounding off - maintaining the tool s longevity and effectiveness.

These tough alloy C-clamp locking pliers from Steck temporarily repair vehicles by reconnecting ball and socket tie rod ends that have been separated. This makes loading and unloading your car carrier easier and faster because all the wheels are in alignment. They also allow mechanics to easily steer vehicles into a repair bay.

The Tiger Tool pin & bushing service kit services both rubber-isolated and threaded pins & bushings while the suspension remains on the vehicle. The 15000 Pin and Bushing Starter Kit, together with one or more adapters, eliminates time-consuming, labor-intensive and costly processes; technicians are no longer required to remove the suspension, haul it to the shop press or reassemble it to the vehicle. Altogether, this system reduces shop time by as much as 70%! With more than twenty different adapter kits to choose from, and with new ones being developed all the time, there simply isn't a more comprehensive solution for servicing pins and bushings. All of the adapter kits are available separately - saving you money and ensuring you only purchase the components needed in your shop. This system is powerful. Capable of generating 20 tons of pulling strength, even the most seized and rusted pins and bushings don t stand a chance. Components are machined and assembled in-house, undergo rigorous testing and receive multiple treatments to ensure they'll endure even the toughest jobs.

The Tiger Tool heavy duty king pin press allows king pins to be removed in minutes with relative ease and efficiency. This tool is for use on straight and tapered king pins from 7/8"" to 2-5/32"". Isuzu NPR and GMC/Chevrolet W-series trucks require a custom adaptor(part number 90150-15).

Avoid costly fines and downtime - make sure your brakes are always operating at their best!

The Tiger Tool adapter kit easily services the Kenworth pin and bushing #B13-1002 and #B65-1008 while the suspension remains on the vehicle.

The Tiger Tool Pitman arm master service kit features tools for servicing a variety of pitman arms, from medium to heavy duty trucks.

The Tiger Tool Rockwell slack adjuster puller safely and efficiently removes virtually all Rockwell self-adjusting slack adjusters. This tool is for use on all heavy duty Rockwell self-adjusting slack adjusters with a depth of up to 2-3/4".

The Tiger Tool adapter kit easily remove and install the Kenworth/Peterbilt Pin & Bushing #B65-1013 while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily services the Kenworth pin & bushing #B65-1012 while the suspension remains on the vehicle.

The Tiger Tool heavy duty yoke puller simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to the yokes or other components. It is used on yokes with a bearing diameter between 1-7/8" and 2-3/16". When it comes to quality, no detail is too small. To prolong the life of the forcing screw, the pull bar is precisely milled with a chamber. The caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks. Tackle more jobs with fewer parts using the 10803.

The Tiger Tool leaf spring pin socket (Large) allows you to remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions.

The Tiger Tool brake clevis pin press instantly shears off the cotter pin as the clevis pin is easily removed. It fits virtually all makes and models of truck and trailer slack adjuster brake clevises.

The Tiger Tool tie rod end remover set provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. The set is for use on 7/8", 3/4" and 20mm tie rod ends.

The Tiger Tool arm puller easily removes even the most stubborn pitman arms on Sheppard M110 gear boxes.

The Tiger Tool Haldex multi adjustable slack adjuster puller safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm designs from either side.

The Tiger Tool adapter easily services the Freightliner Airliner and Peterbilt Low Air Leaf rubber isolated pin and bushing while the suspension remains on the vehicle. Tiger Tool designed the push adapter with a defined edge to create more contact between the adapter and the sleeve of the bushing - essentially eliminating any slipping. Making the design even more meticulous, 28 magnets are built into the components of the tool. Altogether, this ensures the tool is easy to assemble, easy to install and keeps hands clear during operation.

The Tiger Tool leaf spring pin socket (Small) allows you to remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions.

The Tiger Tool Pitman Arm Spreader safely and efficiently removes pitman arms on 2-ton and larger trucks.

The Tiger Tool manual slack adjuster puller safely and efficiently removes all makes and models of manual slack adjusters. The glove design more evenly distributes the load when pulling the slack adjuster out to ensure the puller doesn't spread.

The Tiger Tool 6 point axle nut socket can remove and install 6 point axle nuts without the risk of flaring or rounding out.

The Tiger Tool adapter kit is made to easily service the Kenworth pin and bushing #5296, #5295 while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily services the Kenworth pin & bushing #B65-1006 while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily services the Mack pin & bushing #10QK254M2 while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily removes and installs the Freightliner and Sterling pin & bushing #16-14603-000 while the suspension remains on the vehicle.

Eliminates the hassle of removing door hinge bushings with a regular punch. Offset design makes it easy to access all door hinges. Breaks fewer bushings. Made of super-tough alloy steel.

The Tiger Tool leaf spring pin socket for Volvo/Mack allows you to Remove and install threaded leaf spring and shackle pins on Volvo and Mack suspensions.

The Tiger Tool slack adjuster rod pin press instantly shears off the cotter pin allowing the 3/16" clevis pin to be easily removed. It fits virtually all makes and models of automatic slack adjuster rod pins.

The Tiger Tool automotive bearing cup installer installs two bearing cups in one procedure on virtually all medium and light-duty U-joints. An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip. The u-joint is then rotated and the process repeated, effectively installing both bearing cups.

The Tiger Tool adapter kit easily services the Kenworth pin & bushing #B65-1001 while the suspension remains on the vehicle.

The Tiger Tool Gunite/Brunner/Bendix slack adjuster puller safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters.

The Tiger Tool arm puller easily removes even the most stubborn pitman arms on Sheppard M100 gear boxes.

The Tiger Tool Hendrickson pin & bushing #44695 makes it easy to remove and install the Hendrickson pin and bushing #44695 pin and bushing while the suspension remains on the vehicle. Easily remove and install the FIREMAAX/PRIMAAX Bushing while the suspension remains on the vehicle.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

The Heavy Duty Universal Hub Puller is the answer for bearings that have seized to the spindle as a result of corrosion. Simple to set up and operate, the 10903 makes quick work of seized hubs including ConMet Preset, Dana/Spicer LMS, and Meritor Unitized. With six unique adapter sets to choose from, Tiger Tool's Heavy Duty Universal Hub Puller is as dynamic as you need it to be.

Unable to export outside of the United States

• Safely and effectively removes even the most seized hubs
• Manufactured from high-grade steel for strength and durability
• Five additional adapter sets available separately
• Includes the two most common 22mm RH 10630 stud adapters
• Application: For use on front steer, drive axle and trailer hubs

The Tiger Tool adapter kit easily services the Peterbilt Air Trac rear rubber isolated pin and bushing while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily services the Hendrickson Intraax tri-functional bushing while the suspension remains on the trailer.

The Tiger Tool leaf spring pin socket (Medium) allows you to remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions.

The Tiger Tool leaf spring pin socket (Extra Large) allows you to remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions.

A more cost effective solution that delivers the performance and quality you expect from Freedom Industrial Hydraulics. The high strength reinforced alloy reservoir is lightweight and corrosion resistant which means longer service life and greater portability. Includes 6' or 12′ hose and gauge.

Generating 20 tons of power, the 20 Ton Hydraulic Cylinder is used in our 15000 Pin & Bushing & 10909 Hydraulic Bearing Race Starter Kits.

Utilizing your existing Tiger Tool Hydraulic Cylinder, this Starter Kit allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings - all while the suspension remains on the vehicle.

The Tiger Tool leaf spring pin socket set allows you to remove and install even the most stubborn threaded leaf spring and shackle pins on International, Peterbilt, Kenworth, Volvo, Western Star, and Mack suspensions.

The Tiger Tool 7/8" tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.

The Tiger Tool 20mm tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.

The Tiger Tool 3/4" tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.

The Tiger Tool adapter kit easily services the Kenworth and Peterbilt pin & bushing #B65-6005 while the suspension remains on the vehicle.

The Tiger Tool arm puller easily removes even the most stubborn pitman arms on intermediate trucks, school buses and other vehicles with a nut release pitman arm.

The Bendix® ADB22X™ Air Disc Brake Tool Kit from Ken-Tool contains the tools you need to change Bendix® air disc brake tappet and boot assemblies, tappet inner seals, and guide pins and boots.

The SPL Bearing Cup Installer was designed to be as simple as possible. Pre-determined installed heights specified by the manufacturer have been engineered into the tool ensuring correct installation of bearing cups - every time. The Tiger Tool SPL bearing cup installer installs bearing cups quickly and accurately into the Spicer SPL 140, 170 and 250 Series drivelines quick-disconnect U-joints.

The Tiger Tool Pitman arm service kit is designed to service most common styles of Pitman Arms including the Sheppard M100 style Gear Box.

The Tiger Tool adapter kit easily removes and installs the International #3533233C1 pin & bushing while the suspension remains on the vehicle.

The Tiger Tool adapter kit easily services the Meritor tri-functional bushing while the suspension remains on the trailer.

The Tiger Tool adapter kit easily services the Hendrickson Vantraax tri-functional bushing while the suspension remains on the trailer.