Battery Chargers, Maintainers & Memory Savers

This self-contained Battery Memory Saver retains all automotive presets and computer memory when disconnecting or charging batteries. Unit features a direct-wired OBD2 connector, 12V DC sealed lead acid battery and 4A circuit breaker protection. A handy on/off switch and LED indicator that confirms connection make this memory saver simple to use. Includes 120V AC charger.

One of our most powerful, highest-performing, energy-efficient, and compact chargers yet. A 6-volt and 12-volt battery charger, battery maintainer, and battery desulfator for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.

The Quick Cable ECM/ECU/PCM Memory Saver Cable (OBD II) with a power pack to prevent the loss of memory in a vehicles computer when the battery is disconnected.

Clore Automotive introduces the SOLAR ESA30 OBD II Memory Saver Connector. The connector can be used in conjunction with a jump starter to preserve vehicle codes and electronic presets while a vehicle s battery is disconnected. The ESA30 acts as an interface between a jump starter and a vehicle s OBD II port. This prevents any electronic memory loss when disconnecting a vehicle s battery.

The Quick Cable ECM/ECU/PCM Memory Saver Cable (Pre OBD II) with a power pack to prevent the loss of memory in a vehicles computer when disconnecting the battery.

These chargers are safe for AGM and sealed lead acid batteries and vacuume impregnated heavy-duty transformer to seal the unit against external agents. Includes multi-diode rectifiers (patented) to take over in case of failure. The charger includes a fan cooling mechanism preventing overheating, this enhances the unit's life span significantly. The unit will not arc or spark and is safe in any weather for operation. Includes patented "Flexi-Spring" cable guards relieving cable stress and is built with a heavy-duty chrome plated handle.

Replacement cables for the Universal Joint Puller. 21" long.

The 6 way bus bar distributes power from a single input to six outputs. Insulated mounting bases have recessed mounting holes to prevent accidental shorts on conductive surfaces. The bus bar is rated for 100 amps at 48 volts DC. Two 1/4 inch studs, nuts and lock washers allow for input with 6 output #8 stud Phillip screws. This bus bar model includes a cover for added protection and durability, promoting a longer life span.

SafeAll's REV emerges as the top-tier choice for professional-grade portable EV charging within the roadside assistance sector. Delivering a robust 48 Amps output, this highly portable unit easily slots into the cargo area of a pickup truck or within a utility vehicle, offering service providers a convenient solution for emergency charging scenarios in various locations such as roadsides, parking lots, or driveways.

The 6006AGM Associated battery charger is one of the highest performance fleet automotive battery charger on the market, and comes manufacturer's best boost rating of 280 Amps. The charger is used for 6, 12 and 24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers along with a longer AC cord and DC leads are standard features for higher performance. UL listed for indoor and outdoor use safe in any weather.

NOCO GENIUS2D, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS2D is a 2-amp direct-mount battery charger and battery maintainer engineered to be securely mounted nearby the battery. Its designed for all types of 12-volt lead-acid batteries, including flooded, gel, AGM and other maintenance-free batteries.

The Quick Cable iQ4 lithium jump pack delivers optimal battery charge for all lead acid type batteries including SLA, AGM, gel cell, and standard/deep cycle batteries. These lithium jump packs include multiple programmable modes and make sure your battery is charged.

Highest performance fleet, heavy duty car charger on the market. Option of 375 Amp or 400 Amp boost rating crank assist. 6001A charges 6/12 volt batteries and 6002B charges 6/12/18/24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers, longer AC cord and DC leads are standard features for higher performance. Features fully insulated "Flexi-Spring" clamps, the strongest in the industry. An automatic timer for accurate charging with "Stop/Go" light polarity protection. Built with heavy-duty chrome plated handle and rugged 7" wheels. UL listed for indoor and outdoor use, "Safe In Any Weather".

The Atec 9003A is an automotive 1 amp battery charger maintainter. For use on 6 and 12 V batteries.

Associated Equipment's Model 6010B Heavy-Duty Portable Battery Charger charges all standard and maintenance-free 6/12/24V batteries. The handheld charger features four charging positions and includes a 120-minute automatic timer. Internal fan cooling prevents overheating, and the patented Stop/Go indicator light protects against incorrect polarity.

This 1.5 Amp 12 Volt battery charger/ maintainer automatically powers on when needed. Float mode engages when battery is fully charged. The durable plastic case prevents damage to charger from oil, water, gasoline and other automobile fluids.

Intellamatic 12 Volt AGM GEL Flooded Technology Automotive Battery Charger Analyzer Power Supply is perfect when just a little more power will do! Connect the terminals to your small or large battery and let it do the work. This charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge) as well as "DEEP DISCHARGE RECOVERY". Electrical Stability System (ESSTM) technology feature is a stable 25 Amp power supply for extended service procedures or re-flashes and best of all it's Made in America. Whether you are dealing with a motorcycle or a large truck battery, the 9425 won't overcharge, because of its automatic float system. Three LED lights on front panel will tell you the state of charge. This portable and versatile charger will charge all 12 volt batteries.

This unit is for use with Models 6075, 6075CB & 6075S Bus Bar. 300 Amp insulated safety clamps when used with 6075. Automatic with 3 settings: Flooded, AGM and Manual.

This bus bar set is for parallel charging, ensuring a convenient way to hook up to four batteries/vehicles in parallel. It has a 10 battery capacity and you can use one or combine additional bars for added capacity. This is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA and 300 Amp insulated safety clamps.

6366 Associated 4 x 20 Industrial Gang Charger for Standard Automotive, Deep-Cycle, AGM and Gel Cell Batteries - Fully-Automatic charging channels that control voltage and current up to 20 Amps per circuit. Four sets of LED indicators showing charging status by battery. Four sets of detachable 6 foot leads with 300 Amp heavy duty clamps. Charges all types of 12 volt batteries, AGM Batteries, Gel Cell Batteries, Sealed Batteries, Standard Flooded Batteries - including Spiral Cell, Orbital, or Optima batteries. Patented diagnostics indicate weak or defective battery.

The 6080A Associated 6 Amp Battery charger for "Flooded" or wet automotive and "Maintenance Free" batteries. Charge up to 36 Cells ( 6 batteries) in Series. New technology enables higher output voltage for charging new batteries and rejuvenating sulfated batteries. Fully charges six maintenance-free batteries at a time. Has an isolated transformer for better safety, plus circuit breaker protect ion. Includes five charging leads. Mounts on wall or benchCharging Jumper Cups are used to connect batteries with top post connectio ns. Connecting batteries in series (see illustration) allows a person to charge a number of batteries at one time using only one low current, high voltage charger. The amount of charge that each battery receives is indicated by the ammeter. Thus, each battery will arrive in a fully charged condition at a different time. Conditions that affect charging time are battery temperature, size, state of charge, type of battery, and other factors. Six and twelve volt batteries may be intermixed when series charging. The total volta ge of the batteries should not exceed the rated voltage of the charger. Example: A Charger is rated a nominal 36 cells. Six 12 volt batteries in series or twelve 6 volt batteries in series can be charged or any combination of six and twelve volt batteries that tot al 36 cells. To charge batteries in series, connect the charger's positive lead to the positive post of the first battery. Connect a jumper from the negative post of the first battery to the positive post of the next battery. Continue until all batteries are conne cted. Attach negative lead of charger to remaining battery post.

IBC6008MSK Associated Intellamatic 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port. Includes 12? Memory Saver Cable and Terminal Covers. The IBC6008MSK provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, Deep-Cycle and Lithium Ion Batteries. Including Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS?) technology turns 6008 into a stable power supply for extended service procedures or re-flashes. During battery removal, use of the memory saver kit will allow you to maintain a nominal 13.7V DC output via the OBDII Port on your vehicle.

MS6209 ATEC Automotive Memory Saver Cable - This unit helps to prevent the los s of electronic memory when disconnecting the battery and using a power supply. The cigarette lighter / 12Volt accessory adapter can be used with any Associated Kwikstart receptacle and the other end simply connects to the OBDII port on any 1996 or later vehicle.

MS6210-12 Associated 15 Amp Memory Saver 12Ft. Cable Cig Adapter. 12 ft ?Heavy Duty Straight Cord 15 Amp Continuous / 20 Amp Peak Memory Saver Cable Cigarette Lighter Plug Input / Output with in-line fuse.

Associated Equipment 5 Amp Memory Saver 12Ft. Cable OBDII. Automotive Memory Saver Cable - This unit helps to prevent the loss of electronic memory when disconnecting the battery and using a power supply. The cigarette lighter / 12Volt accessory adapter can be used with any Associated Kwikstart receptacle, or battery charger with memory saver port (MSK Units).

The ATEC 3055A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery t ypes. Five charging modes are available 6V/2 Amp, 6V/4 Amp, 12V/2 Amp, 12V/10 Amp & 12V/50 Amp for engine starting. The built-in dig ital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier p rovide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correc t connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for be tter connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when th e starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

Portable Smart Charger 6/12 Volt Full-Rate Charger With 100A Engine Start. Automatic 6 &12 Volt settings turn off at full charge and turn back on if battery needs more power. LED Digital Display indicates charging voltage, amperage, charge time and countdown for start function

6021AGM is a 6/12/24 Volt Charger & Tester combination with a 12V AGM safe charge setting. This unit gives users the ability to choose between battery test or battery charge upon initial connection or after initial charge or test process is complete. The 'Dead Battery Override' switch recovers a dead battery and then tests it with the same unit, making the product very useful and timesaving.

Replacement battery for Goodall by Vanair Fleet Start.

The 6078 charger is an efficient parallel automotive battery charger. This unit delivers powerful performance by being able to charge up to ten 12 volt batteries in parallel, in less than 24 hours time. It is designed to operate on 220 volts AC 50 / 60 Hz. Features a patented multidiode rectifier with a deep reserve capacity, circuit breaker protection, isolated transformer, and the option to mount on a bench or a wall.

The Associated Model 6065 battery charger is designed to charge 1 to 10 12 volt automotive batteries in parallel, in parallel, in le ss than 24 hours. Designed with the fleet or high volume shop in mind. Great for salvage yards as well. The multiple charge rates al low batteries to be slow charged or fast charged at a rate not to exceed 30 amps output of the charger. Patented multi-diode rectifi er with deep reserve capacity. The volt meter allows you to adjust the charge rate to compensate for battery type, size and quantity of batteries on a charge. The output leads are terminated in ring terminals and designed to be permanently attached to the Associat ed 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended to be used as a car starting unit.

Associated Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status. For standard automotive, deep-cycle, AGM and GEL Cell Batteries. Electrical Stability System (ESSTM) technology feature is a 45 Amp stable power supply for extended service procedures or re-flashes (Nominal 13.7V DC Output). This unit also features a program for deep discharge recovery of flooded batteries saving you money on discarded batteries. Patented diagnostics indicate weak or defective battery. Battery Selector Switch For Sealed / Flooded / ESS Flash. Dead Battery Override Control. Heavy Duty Construction means it will last a lifetime. MADE IN USA

The ESS6007B Associated Equipment Automotive Battery Charger Boost Intellamatic has Electrical Stability System (ESS?) for re-flashe s. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defect ive. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries.

The GENIUSPRO, a 6-volt,12-volt, and 24-volt fully-automatic professional smart charger, maintainer, power supply, and battery-desulfator with temperature compensation rated at 50-amps for all types of automotive, marine, and deep-cycle batteries.

The series charger workhorse Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking. Added safety feature provides greater protection when charging 10 batteries where the voltage approaches 158 volts DC. Output current can be smoothly adjusted over full range of front panel control. Polarity protection for operator and equipment safety. Nine charging leads included.

The ESS6008 Associated 60/270 Amp 12 Volt Automatic Automotive Battery Charger/ Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS?) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste. The Dead battery over ride switch brings batteries above the 4 volt minimum for testing and charging eliminating the need to pre-charge before testing. The 270 Amp boost for helps jump start vehicles. Made in the U.S.A. The "Does Everything" wheel charger which has 60 Amp charge rate and 270 Amps of crank assist.

Associated Equipment's Intellematic Model ESS6011 is a versatile 12/24V, 70/35A and 200A boost wheeled smart charger with a 70A power supply for standard automotive, deep-cycle, AGM and gel cell batteries. The Electrical Stability System technology turns the ESS6011 into a stable power supply for extended service procedures or re-flashes. The charger display includes an analog meter and three-stage LED charger indicator status.

This unit is a 12v 60/70 Amp / 270 Amp boost Smart Charger and power supply with 15 Amp memory saver port for standard automotive, deep-cycle, AGM and gel cell batteries. It includes a 12' memory savor cable and terminal covers. Program for deep discharge recovery of flooded batteries and patented diagnostics indicate weak or defective batteries.

IBC6008 Associated Intellamatic 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port. Includes 12V Memory Saver Cable and Terminal Covers.

This bus bar set has a 10 battery capcity for parrallel charging for use with 6066A smart charger or other parallel chargers.It is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA, 72" long with 300 Amp insulated safety clamps.

The Associated ESS6100 is a 100 Amp high power Smart charger Power Supply with inverter technology. It allows you to keep a 12 V lead, AGM, EFB, Gel Cell, or lithium batteries at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

Meet the all-new GENPRO, similar to the NOCO GEN, only better. It's 10% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers. We offer the four, three, two and one bank onboard battery charger, rated at 10-amps per bank, for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes: 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, for all types of lead-acid and lithium-ion batteries.

Charges up to 36 automotive batteries in parallel, in less than 24 hours. Can be wall-mounted or on a stationary bench, 16 charge rates for precise charging. Each battery accepts charge required, depending on size, state of charge and temperature. Engineered so that an initial high charge rate tapers down to a safe finishing level. A isolated transformer and a heavy-duty diode rectifier with deep reserve capacity are standard features on this model. Model 6068 Battery Charger is designed to charge 12 volt batteries in parallel. The multiple charge rates allow batteries to be slow charged or fast charged at a rate not to exceed 110 amps output of the charger. The output leads are terminated in ring terminals and designed to be permanently attached to the Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended as a car starting unit.