Cylinder and Pin Replacement HD

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This Boom Fold Cylinder from Miller Industries is used on the Underlift Assembly of Century and Challenger Wreckers. Seal Kit is

This is a replacement boom lift cylinder upper pivot pin for the Century 7035, 9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a lower lift cylinder pin weldment from Miller Industries.

This Seal Kit from Miller Industries is used as a replacement seal kit for a Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.

This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder of a Challenger CH-45 Wrecker.

This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder

This is a replacement boom lift cylinder for the Century and Challenger heavy duty integrated wrecker by Miller Industries. This is the cylinder that raises and lowers the boom on your wrecker. This cylinder connects to the subframe and to the outer boom weldment of your wrecker. It is also designed for the right or left position on the wrecker. To view the models this cylinder fits, See Features below. To view the part schematics, see the Brochure tab.

This Seal Kit from Miller Industries is used on Underlift Extend Hydraulic Cylinder

This is a replacement boom lift cylinder pin. This is the pin that goes into the base end of the cylinder to attach the cylinder to the wrecker's subframe weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20 Medium Duty Wreckers by Miller Industries. To view specific models this pin fits see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan V30 heavy duty integrated wreckers by Miller Industries. This pin is used on the base end of the cylinder and attaches the boom extend cylinder to the outer boom weldment. This is the boom extend cylinder pin that is towards the front of the wrecker. To view the models this wrecker fits, see Features below. To view the part schematics, see the Brochure tab.

This is a Miller upper and lower lift cylinder pin weldment.

This is a replacement boom lift cylinder on the Century 5130 & 5230 and the Challenger CH-32 heavy duty wreckers by Miller Industries. This cylinder attaches to the subframe of the wrecker and to the outer boom weldment to elevate the boom of the wrecker. This cylinder is designed to work on the right and left side of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This 3/16" x 1-3/4" Roll Pin from Miller Industries is used on the Subframe Assembly of several Miller Century and Challenger Wreckers. When used a roll pin it is recommended that the hole size be the same as the diameter of the pin, 3/16" in this case. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

This is a replacement boom lift cylinder pin for the Century 3212 and the Vulcan V-30 heavy duty wreckers by Miller Industries. This pin is used for the upper and lower lift cylinder pin. This pin connects the lift cylinder to the subframe and the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder front pin for the Century 4024 heavy duty integrated wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin attaches the extend cylinder to the main recovery boom outer weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom lift cylinder for the main recovery wrecker boom weldment on Century 4024 heavy duty integrated wrecker by Miller Industries. This cylinder is designed to fit both the right and left positions. To see what models this cylinder will fit, see Features below. To view part schematics, see the Brochure tab.

This is a replacement boom lift cylinder for the Century 1040B, 1060S, 1130/1140, 9055, Challenger CH-45 heavy duty wreckers by Miller Industries. This cylinder connects to the subframe weldment and to the outer boom weldment to raise the boom of the wrecker up and down. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder rear pin for the Century 4024 heavy duty integrated wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the extend cylinder to the main recovery boom inner weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder rear pin on the Century 5130/5230 and Challenger CH-32 heavy duty integrated wreckers by Miller Industries. This pin goes through the rod end of the cylinder. It is the pin that connects the inner boom weldment to the boom extend cylinder. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder front pin on the Century 5130/5230, Challenger CH-32 and Vulcan V-50 heavy duty integrated wreckers by Miller Industries. This pin goes through the base end of the cylinder. It is the pin that connects the boom extend cylinder to the outer boom weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom lift cylinder rod end pin for Century and Challenger medium duty wreckers by Miller Industries. This pin attaches the boom lift cylinder to the man recovery boom outer weldment. To view the specific models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extension cylinder rear pin for the Century 1130/1140, 7035, and Challenger CH-35 heavy duty wreckers by Miller Industries. This is the pin that connects the boom extend cylinder to the inner boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see that Brochure tab.

This is a replacement boom extension cylinder front pin on the Century 1130/1140, 7035, and Challenger CH-35 heavy duty wreckers by Miller Industries. This is the pin that connects the extend cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom lift cylinder for the Vulcan V-70 and V-90 heavy duty wreckers by Miller Industries. This lift cylinder connects to the wrecker's subframe and to the outer boom weldment. This cylinder is designed to fit the right and left side of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extension cylinder for the Vulcan V-60, V-70, V-90, and V-100 heavy duty wreckers by Miller Industries. This cylinder connects to the inner and outer boom weldments and extends the inner boom weldment away from the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder rear cylinder for Century and Challenger heavy duty integrated wreckers. This pin goes through the rod end of the cylinder and attaches it to the main recovery boom inner weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochures tab.

This is a replacement boom extension cylinder for the Century 1040B, 1060S, 1130/1140, 5130/5230, 7035, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This cylinder connects to the outer and inner boom weldments to extend the boom out. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom anchor pin for Holmes wreckers.

This is a replacement boom extend cylinder for the Century 1130/1140, 9055 and the Vulcan V-100 heavy duty wreckers by Miller Industries. This cylinder connects to the outer and inner boom weldments to extend the boom of your wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder for the Century 4024 heavy duty integrated wrecker by Miller Industries. This is the cylinder that connects the outer and inner boom weldments of the main recovery boom together. This is the cylinder that causes the inner boom weldment to extend out behind the wrecker. To see what models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder for Century and Challenger heavy duty integrated wreckers by Miller Industries. This is the cylinder that extends the main recovery boom of your wrecker. To view the specific models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder rear pin for the Century 9055 and Challenger CH-45 heavy duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder and connects the boom extend cylinder to the inner boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder front cylinder for Century and Challenger heavy duty integrated wreckers. This pin goes through the base end of the cylinder and attaches it to the main recovery boom outer weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochures tab.

This is a replacement boom extension cylinder rear pin for the Vulcan V-100 heavy duty wrecker by Miller Industries. This pin connects the boom extend cylinder to the inner boom weldment of your wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

Miller Industries provides a replacement seal kit lift cylinder 1040.

This is a replacement boom extension cylinder front pin for the Vulcan V-100 heavy duty wrecker by Miller Industries. This pin connects the boom extend cylinder to the outer boom weldment of your wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extension cylinder for the Century 1060, 1075, 9055, and Challenger CH-45 heavy duty wreckers by Miller Industries. This cylinder connects to the outer and inner boom weldments to extend the boom in or out on your wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is a replacement boom extend cylinder for a Century 5130 and Vulcan V-50 heavy duty integrated wrecker by Miller Industries. This is the cylinder that raises the boom on your wrecker. This cylinder attaches to the subframe and to the outer boom weldment of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematic, see the Brochure tab.

This is a replacement inner boom weldment for the Vulcan V-70 heavy duty wrecker by Miller Industries. To view the models this inner boom weldment fits, see Features below. To view the part schematics, see the Brochure tab.