Tail Light Assemblies & Wiring Harnesses

This 4" Round Back Up Alarm from Miller Industries can be installed in the rear tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

6" LONG ID-1/4" SHRINK ID-3/32".

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

6" Oval red LED light. These lights will be standard on heavy duty units.

Miller Industries' winch loop harness assembly for 17', 16' and 19' Century, Champion and Vulcan carrier beds.

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

Update the wiring for the exterior DOT lighting on your Century car carrier with this new harness from Miller Industries. Wiring fits up to 21'6" decks. Replaces 0302217.

This Miller Industries product is the left hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.

This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.

This is a stainless steel tail light face plate for the right hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or license plate mounting hardware as pictured in photo. All that is included is the stainless steel face plate.

This is a stainless steel tail light face plate for the left hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or back up alarm pictured in photo. All that is included is the stainless steel face plate.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This Miller Industries tail light mounting bracket connects the left hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.

This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.

This Miller Industries tail light mounting bracket connects the right hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.

This is a Miller Industries tail light face plate for the right hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721340).

This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.

This is a Miller Industries tail light face plate for the left hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721339).

This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed fo r any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This produ ct bolts onto the mounting bracket (12-0710784) which is attached to the subframe of the carrier. The replacement faceplate part number is 12-07000562. See features for additional inform ation. This part can be used to replace Part Number 12-0905007.

This Galvanized Tail Light Housing is for the left hand side of Century or Vulcan LCG Generation I or II Car Carriers. This shell houses all of the left hand side tail light components and the face plate. It bolts onto the mounting bracket,

This Miller Industries LED side light is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. Included with this is the flasher control power unit which allows it to function as a marker light and flasher light.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its galvanized steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This tail light grommet fits the Century and Vulcan 16 Series LCG '09 to '14.

This Heat Shrink Tube, or Scuff Jacket, seals and protects cable splices, terminations, and bed hoses. This jacket is suitable for a variety of low-voltage electrical and mechanical applications, where lightweight and flexibility are important. This tube can be used on the Hydraulics Assembly of Century and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0303193.

This Miller Industries product is a full assembly of the right side of a tail light section on a car carrier. It is designed for Vulcan Car Carriers. It includes all the necessary parts to replace the entire tail light section this product bolts into the mounting bracket which is attached to the subframe of the carrier.

This Miller Industries product is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for Vulcan Car Carriers. It includes all the necessary parts to replace the entire tail light section. This product bolts into the mounting bracket which is attached to the subframe of the carrier.

This is a Miller carrier tail light face plate for horizontal lights left hand side (black).

This is a Miller Industries tail light face plate for the Right hand side of any LCG Car Carrier. It is available in stainless steel. The light configuration is horizontal.

This is a LCG carrier control light mounting bracket from Miller Industries.

This Miller Industries product is a right side tail light assembly for car carriers.

This Heat Shrink Tube, or Scuff Jacket, seals and protects cable splices, terminations, and bed hoses. This jacket is suitable for a variety of low-voltage electrical and mechanical applications, where lightweight and flexibility are important. This tube can be used on the Hydraulics Assembly of Century and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0303193.

This is a Wiring Harness for the Century 22'

This is a Miller Industries tail light face plate for the left hand side of any LCG Car Carrier. It is available in stainless steel. The light configuration is horizontal.

Miller Industries new style new style dual bonded hose assembly for a 19' bed. Comes with dual trays, 172".

This License Plate Illuminator from Miller Industries is used on the Frame Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This Miller Industries product is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for Century or Vulcan LCG Series (1st Generation 2013 and older). It includes all the necessary parts to replace the entire tail light section. This product bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This Miller Industries product is a left side tail light assembly for car carriers.

This Miller Industries product is a full assembly of the left side tail light for a car carrier.

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

This is an LED License Plate Light Kit from Miller Industries. It is LED and can be applicable to most Century or Vulcan car carriers.

A high power LED light. Mounts to the body using screws (not included). Sealed electronics are weather resistant. Includes a plastic black bezel, flange-mount, and a short wire. Draws low energy, operating on just .5A. Standard Vehicle Power: 12V DC

This Miller Industries product is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for Vulcan Car Carriers. It includes all the necessary parts to replace the entire tail light section. This product bolts into the mounting bracket which is attached to the subframe of the carrier.

This is a Clearance Light Grommet Kit that can be used on Miller Carriers.

This is a Miller bed tilt cylinder, for a 30 series.

This Tail Light Housing has two holes plus a marker light hole. It is made from stainless steel, so it will last for years. This housing replaces old style heavy duty light housings.

This is a Underbody Hose Tray for Earlier Challenger and Champion Car Carriers by Miller Industries. This is used on Aluminum Beds.This part will be cut into three sections for economical shipment. Replaces part number 12-0704799.

This Miller Industries product is the tail light housing and stabilizer for Century or Vulcan 15, 20, and 30 Series Car Carriers (Prior to 2006). Its painted black steel shell houses both the right and left side tail light components, as well as the face plate. Prior to 2006 this part also is known as the stabilizer. 2006 and newer models have the tail light housings bolted onto the subframe unit. See features for additional information.