Car Carrier Parts

These Car Carrier Pylons are used with Miller Century, Champion, Challenger, Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier Pylons are commonly used as cab protectors. See application chart under the brochures tab.

This Zinga Filter is from Miller Industries. It is 2.75" OD x 5.18" L and has Buna-N Seals. This filter element SME10 is used in

This is a replacement control handle for the new Miller Car Carriers. It is blue in color, and measures 8" long.

This zinc-plated slide-in L-Arm fits the wheel lifts on various models of Century, Holmes and Challenger wreckers and Century, Champion, Challenger and Vulcan car carriers.

This is a replacement control handle for the new Miller Car Carriers. It is Gray in color, and measures 8" long.

Note: Special Handling Fees Apply for Specific Items

This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.

• 2 x 2.5 aluminum tube
• Opton of driver or passenger positioning
• Adjustment holes
• Grated scoop tire pan
• Use with 8800900 outer crosstube
• WLL: 4,000 lbs.
  
  Fits:
• 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
• 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
• 2010-Current Vulcan Modular 804 Wreckers
• 2010-Current Vulcan Modular 806 Wreckers
• 2008-Current Vulcan Modular 880/890 Wreckers
• 2002-Current Vulcan 805 Wreckers
• 2000-Current Vulcan 806 Wreckers
• 1999-Current Vulcan 880/890 Wreckers

This cap screws into control valves used by Miller Industries on car carriers. It commonly corrodes from either inside or out. It covers the return to neutral spring mechanism. It is commonly the cause of control lever not moving fully or levers that do not return to their neutral position This part can be used to replace Part Number 9015812.

This 5 Spool Control Valve from Miller Industries is used on the Hydraulics Assembly of many Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

These are Miller Industries Control Handle Knobs. They are offered in Blue (12-0311699), Red (12-0311700), Green (12-0311701) and Gray (12-0311702).

This is a Miller Industries handle assembly for a 5-Spool Control Assembly. See features for what is included in this part#

Stop hydraulic leaks with this replacement seal kit for Miller Industries Parker Valve Body. Used on most Miller Industries car carriers and conventional wrecker bodies.

This is a replacement control handle for the new Miller Car Carriers. It is Red in color, and measures 8" long.

This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach

This is a replacement control light used on the LCG Generation 2 Car Carriers.

This is a Miller Industries Decal Plate for the driver side control box hood. It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels all the levers of a 5-spool system.

This 5/8" diameter Pin comes with a t-handle and release button. It's for Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

This 4" Round Back Up Alarm from Miller Industries can be installed in the rear tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

This is a Miller Industries Decal Plate for the passenger side control box hood. It is designed for all Century/Vulcan Car Carriers prior to 2005 (Excluding LCG). It labels all the levers of a 5-spool system.

This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts ('01 and older). This kit includes one

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with one of these new blocks.

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

• Option of driver or passenger position
• Painted steel
• Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911
  
  Fits:
• 2010 - Current Century Modular Midnight Express
• 2000 - Current Century Midnight Express
• 2007 - Current Century Express 300 Series Modular
• 2009 - Current Holmes 440SL
• 2007 - Current Vulcan Modular 807
• 2000 - Current Vulcan 810 Intruder

6" LONG ID-1/4" SHRINK ID-3/32".

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

Drop In Hydraulic Element Filter. Early style filter used until June of 2007. It is used in filter assembly

This is a replacement body lock hold down bracket kit for the driver side of a Chevron Car Carrier. This kit includes the left hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below.

This is a Miller Industries bed lock pad for the Century 10 or 15 series prior to 2005. It has been replaced by a new bed lock weldment 12-0801209.

This is a replacement body lock hold down bracket kit for the passenger side of a Chevron Car Carrier. This kit includes the right hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below. To view the part schematics, see the Brochure tab.

This Gasket from Ramsey Winch is 1 used in the assembly of 4-Ton Hydraulic Winches,

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held in place with an allen head bolt and washer on the top.

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

Note: Special Handling Fees Apply for Specific Items

This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.

• Option of driver or passenger position
• Fits 2" x 3" outer crosstubes
• Pivot style receivers
• Alloy construction
• Scoop style tire pan
• 4,000-lb. capacity
• Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
• Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
  
  Fits:
• Century 400 Series
• Century 600 Series
• Challenger 4700 Series
• Challenger 4800 Series

Note: Special Handling Fees Apply

This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.

• Vulcan patented strapless system
• Lift rating of 4,000 lbs.
• Accepts L-Arm 8700180
• Get the right hand version of this wheel gird, 8800800
  
  Fits:
  
  
• 2010-Current Vulcan Modular 804 Wreckers
• 2010-Current Vulcan Modular 806 Wreckers
• Vulcan 804, 860, 870, and 880 wheel lifts
• Vulcan car carriers

This Bearing from Ramsey Winch is used in the assembly of 4-Ton Hydraulic Winches,

6" Oval red LED light. These lights will be standard on heavy duty units.

This Detent Kit from Zip's will help to keep the crossbar straight. It fits Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers, and a threaded plug.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

• (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
• (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
• (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
• (44) 12-0400367 1/4-20 Nylon Lock Nuts
• (44) 12-0403009 1/4-20x1" Hold Down Screws
• (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This L-Arm Assembly from Miller Industries comes with a Ratchet and Strap already bolted on. This assembly can be used on Century, Champion, and Challenger 10 Series Car Carriers, as well as, Vulcan Car Carriers that have slide-in L-Arms. This part can be used to replace Part Number 12-0900776.

Note: Special Handling Fees Apply

This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides into the outer crosstube for a secure tire rest.

• Driver or passenger position
• Zinc-plated mild steel
• Adjustment holes
  
  Fits:
• 2001-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel & Aluminum Carriers
• 2002-Current Century 15 Series Steel & Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2006-Current Century 20 Series Steel & Aluminum Carriers
• 2001-Current Champion Steel & Aluminum 19'-21' Carriers
• 2001-Current Holmes 10 Series Steel & Aluminum Carriers
• 2005-Current Vulcan 10 Series Steel & Aluminum Carriers

This is a wheel lift wear pad for the inside, bottom of the outer stinger on Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features for related parts and Brochures for reference charts. This part can be used to replace Part Number, 9100112.

This zinc-plated mild steel L-Arm from Miller Industries fits the drivers side of Vulcan 850 and 890 series wheel lifts. Sometimes called a tire restraint or wheel retainer, the 2 square tube includes a stiffener inside for a total Working Load Limit of 6,000 lbs. This scoop also features adjustment holes for proper tire fitment, and a grated tire pan for improved grip.

This is a Miller Industries Control Box hood for the passenger side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This is an inner & outer tube bearing pad for the wheel lift of a Century or Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each equipped wheel lift. See Features for which years/models they are used on.

This Hex Jam Nut from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

Miller Industries' winch loop harness assembly for 17', 16' and 19' Century, Champion and Vulcan carrier beds.

Parker VDP11 Series 3-Spool Valve Body. Fits 2010 and older. Has been used in many Miller Industries Small Wrecker Bodies.

This is a flange bearing for the outer stinger weldment on the Vulcan 810 by Miller Industries. See Features for related parts and brochures for reference chart.

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

This is a replacement filter element for part number 12-0311288 filter assembly and can be used in place of part number 9018309. The filter bypass is in the element. The filtration media in this element is 10 Micron Cellulose with a dirt holding capacity of 11. This element has a 3/4" port size and a 25 PSI bypass. This is the new style filter and will fit the filter assemblies found on Century, Chevron Holmes and Vulcan Wreckers and Car Carriers.