Parts

Premium quality primary wire cable manufactured to meet or exceed ATA specifications. Color coded PVC cover resists weather and protects the individual color coded, annealed copper conductor strands. Commonly used to install or repair marker/ID light circuits.

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates, plows, spreaders, switch panels and power distribution panels. Choose from 50, 80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master disconnect as well. In the event of a "short circuit" the circuit breaker will "trip" to the off position. Unlike an automatic reset, the manual version stays open until it is manually reset. By pushing the reset button you can also disconnect the entire system. This is extremely helpful when servicing the electrical system.

Rubber GrommRubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

These Car Carrier Pylons are used with Miller Century, Champion, Challenger, Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier Pylons are commonly used as cab protectors. See application chart under the brochures tab.

These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet. It provides your TM-MAG90 magnet with a reliable scratch proof mounting option for your wireless tow lights.

This is a replacement custom snap button for the Speed Dolly aluminum telescoping axles by In The Ditch. This button is made from stainless steel to help prevent against corrosion.

This Zinga Filter is from Miller Industries. It is 2.75" OD x 5.18" L and has Buna-N Seals. This filter element SME10 is used in

Note: Special Handling Fees Apply

This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.

• Lightweight hollow tubing
• CNC-machined solid steel end
• Soft grip handle
• Length produces leverage

Phoenix QuickTrim Smooth Middle Hub Cover Kit for the Front Axle on Medium and Heavy Duty Trucks. Hub Cover is 4 spline front pop-in.

This is a replacement control handle for the new Miller Car Carriers. It is blue in color, and measures 8" long.

This is a complete Latch assembly

TowMate Towlight Standard (6') cigarette lighter charge cord charges any TowMate wireless light that has the small silver DC charging port.

This spring secures winch cable hook on large wreckers. This spring is used on Vulcans and late model Century units as a cable tie-back. This spring links to the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting tube. Compatible with 2004 Units and Newer.

This zinc-plated slide-in L-Arm fits the wheel lifts on various models of Century, Holmes and Challenger wreckers and Century, Champion, Challenger and Vulcan car carriers.

Premium quality trailer wire cable manufactured to meet or exceed ATA & SAE specifications. Neoprene insulation resists all weather and protects the individual color coded, annealed copper conductor strands.

This is a replacement control handle for the new Miller Car Carriers. It is Gray in color, and measures 8" long.

Note: Special Handling Fees Apply for Specific Items

This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.

• 2 x 2.5 aluminum tube
• Opton of driver or passenger positioning
• Adjustment holes
• Grated scoop tire pan
• Use with 8800900 outer crosstube
• WLL: 4,000 lbs.
  
  Fits:
• 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
• 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
• 2010-Current Vulcan Modular 804 Wreckers
• 2010-Current Vulcan Modular 806 Wreckers
• 2008-Current Vulcan Modular 880/890 Wreckers
• 2002-Current Vulcan 805 Wreckers
• 2000-Current Vulcan 806 Wreckers
• 1999-Current Vulcan 880/890 Wreckers

This cap screws into control valves used by Miller Industries on car carriers. It commonly corrodes from either inside or out. It covers the return to neutral spring mechanism. It is commonly the cause of control lever not moving fully or levers that do not return to their neutral position This part can be used to replace Part Number 9015812.

This 5 Spool Control Valve from Miller Industries is used on the Hydraulics Assembly of many Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

These are Miller Industries Control Handle Knobs. They are offered in Blue (12-0311699), Red (12-0311700), Green (12-0311701) and Gray (12-0311702).

This is a Miller Industries handle assembly for a 5-Spool Control Assembly. See features for what is included in this part#

This three-prong, right angle clip pigtail provides power connection for sealed lights, specifically combination stop, turn and tail lights. The red and black lead wires are bare for making power connection. Red is turn signal, and black is tail signal. The white ground wire has #10 ring terminal at the end.

Stop hydraulic leaks with this replacement seal kit for Miller Industries Parker Valve Body. Used on most Miller Industries car carriers and conventional wrecker bodies.

This is a replacement control handle for the new Miller Car Carriers. It is Red in color, and measures 8" long.

This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach

This is a replacement control light used on the LCG Generation 2 Car Carriers.

This is a replacement Parker winch motor from Miller Industries. It is used on the hydraulic assembly of car carriers and wreckers equipped with 8,000 lb. winches. This winch motor is commonly used on hydraulic worm winches, such as Ramsey Winches. This motor is used on Century, Chevron, Champion, Challenger, Holmes, and Vulcan Car Carriers. It is also used on Century, Challenger, Champion, and Eagle light duty wreckers. To view what specific models this winch motor will fit, See Features below. To view the part schematics, see the Brochures tab.

Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies

Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.

Extension tow light cable assembly for use with tow light bars or as an extension for those "long loads." Use with tow light bar part number(s) 1100, 1100P, 1110, and 1100P-48.

This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.

This is a Miller Industries Decal Plate for the driver side control box hood. It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels all the levers of a 5-spool system.

This is a replacement cam lock rebuild kit for the Speed Dolly. This kit includes a roll pin, plunger, and spring.

This 5/8" diameter Pin comes with a t-handle and release button. It's for Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.

This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

3/8" H425-6 Hydraulic Hose

This 4" Round Back Up Alarm from Miller Industries can be installed in the rear tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century, Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch. This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16 Series LCGs. This roller fairlead is designed to reduce cable wear, especially on sharp angle pulls. To view specific models of carrier this fairlead will fit see Features below. To view part schematics click on the Brochures tab.

This replacement Grommet Kit will house a 2-1/2" Round Marker Light. The kit includes a grommet and plug-in.

This is a Miller Industries Decal Plate for the passenger side control box hood. It is designed for all Century/Vulcan Car Carriers prior to 2005 (Excluding LCG). It labels all the levers of a 5-spool system.

Camlock assembly for Century Car Carrier from Diversified Products.

Premium quality trailer wire cable manufactured to meet or exceed ATA & SAE specifications. Neoprene insulation resists all weather and protects the individual color coded, annealed copper conductor strands. Commonly used for tow lights or small trailer wiring.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

GoJak's 4" Caster Assembly - Violet Ring (2nd Gen) are durable and easy moving.

This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts ('01 and older). This kit includes one

DewEze 8 groove serpentine belt clutch pump system "A" mount tapered 6" Ogura MA-MG02-DE 12vdc .

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

No lugnut removal is required for installation. Phoenix ABS Axle Hub Cover with Popout for 10 bolt [33 mm hex lugnut] pattern on 285 mm bolt circle.

This stainless steel Paddle Latch is for use with new style toolboxes that have a striker pin for a latch. The latch locks over the striker pin. This latch comes with a lock and is lockable by key, which is included.

Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with one of these new blocks.

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

• Option of driver or passenger position
• Painted steel
• Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911
  
  Fits:
• 2010 - Current Century Modular Midnight Express
• 2000 - Current Century Midnight Express
• 2007 - Current Century Express 300 Series Modular
• 2009 - Current Holmes 440SL
• 2007 - Current Vulcan Modular 807
• 2000 - Current Vulcan 810 Intruder

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

6" LONG ID-1/4" SHRINK ID-3/32".

Going camping for the weekend? Make sure your truck s lighting system is up to the challenge with this replacement 7-wire female RV plug. This screw-type socket is primarily used in RV applications and includes seven flat blades. The plug is constructed of molded PVC for impact resistance.

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

This is a replacement shoulder bolt assembly for the spindle assembly used on the Collins Dollies.

These Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.