Light Duty Wrecker Parts

This spring secures winch cable hook on large wreckers. This spring is used on Vulcans and late model Century units as a cable tie-back. This spring links to the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting tube. Compatible with 2004 Units and Newer.

This is a decal kit for the wheel lift operations on a Vulcan 880/890 Series by Miller Industries. This part can be used to replace Part Numbers: 9033149, 9033150, 9033151, 9033152, 9033153, 9033154, 9033155, and 9033156.

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

Miller Tail Light, Corner Wraparound, RH or LH, Century & Vulcan

The Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This wire rope guide cover comes off with one hand, allowing for easy wire rope installation.

This is a Lock Pin Weldment with chain that is used on Vulcan Wreckers. It is used on the crossbar assembly with the wheel retainers. It locks the wheel retainer into the crosstube. This part can be used to replace Part Number, 9046566.

This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th at measures 84" long and has a 1" stroke. This cable replaces part numbers: 12-0311724 and 518-1007200.

This Miller Industries Winch Cable Tie-Back Spring secures your winch cable hook on heavy wreckers. This spring is used on Century units up to 2004. The spring links to the cable hook using an oblong master link #9048800. It measures 13" long and has a diameter of 1-3/4".

Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar.

Special high grade weather-resistant industrial rubber fender for trucks, busses, tankers and trailers. After a brush against a wall, loading dock, or another vehicle, rub-a-fenders return to original shape. Solve legal width problem - easily installed - always attractive. Approved for use by leading truck and bus body fabricators. They are commonly used in applications where there is no inner fender lip on which to fasten the fenderette.

This Tension Spring is a direct replacement for the ITD-1196 Universal Spring Tube. This part can be used to replace Part Number 12-0308733.

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

This stainless steel fenderette from Miller Industries is specifically designed for the Aluminum Body Sides of the Century Heavy Duty Wrecker Line. This fenderette is sold in one dimension and requires trimming to the proper length to fit each individual wheel well. Fits Century Integrated Wrecker Models 4024, 5130, 5230, 7035 and 9055. Also Fits Miller Industries Complete Rotator Models 1135, 1140, 1140RXP, 1150, 1150RXP, 1150R, and 1075S. This stainless steel fenderette also is compatible with Miller Industries Poly Body Line. These will also fit on some front axles of class 8 trucks, but not all. Sold Each.

This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.

This is a Miller Industries Control Handle Knob. It is red in color and is labeled Cable "In/Out" for winch operations. This knob is used on many light duty wreckers as well as car carriers. See Features below to view specific models or click on the Brochure tab to view the part schematics.

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

This is our #1 selling filter. It is used on older style 411, 412, 601, 602, 611, 612, 552, 4400, 4800, 301, 311, 312, and 614.

Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.

This is a Miller Industries Control Handle Knob. It is black in color and it is labeled Boom "Up/Down" for the wrecker boom operation. This control knob will work on most light duty wreckers by Miller Industries. To see which specific models this knob will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

3" Spacer to Raise Aluminum Tubular Pylon.

This is a Miller Industries Control Handle Knob. It is black in color and is labeled "In/Out" for boom operations. See Features for related wreckers and Brochures for reference charts.

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger, Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This is a replacement seal kit for the swing L-arm cylinder for autoload wreckers by Miller Industries. This seal kit if for cylinder part number: 12-0303844.

25" Aluminum Tubular Pylon - Available Optional Light Pylon For all Century And Vulcan Small Wreckers For Use On Top Of A Tunnel Box. Requires Work Lights and Signals to Be in the Light Bar.

This is a rubber boot for a control lever on any Century or Vulcan modular wrecker by Miller Industries.

This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use . Each universal spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep your winch lines tight and buy a set of these universal spring tubes.

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

This part can be used to replace Part Number HC0198.

This is a newer style Miller Industries Control Handle Knob (old Style # 12-0301429). It is grey in color and is labeled "In/Out" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

Immersion Filter assembly - SMF1650. It mounts on top, inside, the hydraulic tank. The filter bypass is in the filter head. Replacement element #

This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 - Current), and it will also fit on the Modular Midnight Express (2010 - Current) as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480 Wreckers.

This is a Miller Industries Control Handle Knob. It is grey in color and is labeled "Up/Down" for wheel lift tilt operations. See Features for related wreckers and Brochures for reference charts.

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. This cylinder fits the wheel-lift lift cylinder used on both car carriers and light duty wreckers. See Features below to view specific models of each. To view part schematics click the Brochures tab. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty Wreckers by Miller Industries. This seal kit will fit the lift cylinder on Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view part schematics click on the Brochures tab.

This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty Wreckers. This seal kit is for cylinder part number 12-0301755. To view what models this will fit see Features below. To view part schematics click the Brochures tab.

This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes Light Duty Wreckers by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this boom end sheave will fit.

Control Rod Lever for Miller Wrecker Models. Fits all Century 200 Series, Holmes 550-2, 440-1 and 440-2, Century 411, 412, 611, 612, 601, 602, 712, 716, 211,311,312, Challenger 4700 and 4800 series wreckers with one piece bodies Takes knob kit 12-0901425 for dual winch wreckers and 12-0901426 for single winch wrecker.

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

This Control Knob from Miller Industries is the older style knob. The newer style knob can be found with part number

This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.

This is a 1" Snap Ring by Miller Industries. This snap ring is used on the wheel lift extend cylinder pin. This snap ring secures the pin in place. To view the part schematic click on the Brochure tab.

This is a Jerr-Dan rod, controls .75 DIA x 9.00.

Note: Special Handling Fees Apply

This is the Lift Cylinder on the Wheel Lift of Century Wreckers with the Formula I and Formula 6500 Wheel Lifts. It is used on the Century Formula 6500 - 600 Series and the Modular 400 & 600 Series with these wheel lift options. To view part schematics click the Brochure tab.

• Uses holding valve part number 12-0304567
  
  Fits:
• Century Formula 6500, 600 Series REV A
• Century Modular 400 & 600 (01/2009 - Current)

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

Miller Cast Iron D-ring commonly used with small wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin for Installation (Part #BA0259).

Note: Special Handling Fees Apply

These 3" wide Fender Flares from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. They will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. These fender flares do not fit the early 401-402 or other straight sided Century bodies. Sold as Pairs (One Left & One Right).

Cannot ship by mail.

• Here's the finishing touch for your wrecker!
• Custom designed for a perfect fit on a variety of popular wrecker body styles
• These flares can be painted to match
• Easy installation
• Create a clean custom look
• They fit light and medium duty wrecker bodies
• Priced per pair
• 3" wide
• Body Accessory for Century 411-412 & 601-602
• Do Not Fit the Early 401-402 or Other Straight Sided Century Bodies
• Old Part Number: PBF10

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

This is the base lift cylinder pin on the wheel lift of Century, Challenger and Holmes wreckers by Miller Industries. This pin replaces part number 12-0801012. This cylinder pin will fit the following wreckers: Century Formula I - Duplex Tilt 411 & 412, Formula I - Duplex Tilt Super Six & 500, Formula 6000 - 600 Series, Formula 6500 - 600 Series, Metro I - Duplex Tilt, Challenger 4700 Series, and the Holmes 440 Series. To view year ranges see Features below. To view part schematics click on the Brochures tab.

The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.

Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

This is the seal kit for the wheel lift tilt cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. To view part schematic click on the Brochure tab.

This is a newer style Miller Industries Control Handle Knob (older Style # 12-0301428). It is grey in color and is labeled "Up/Down" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

Note: Special Handling Fees Apply

This is the extend cylinder for the wheel lift on Miller Industries Light Duty Wreckers. This will fit the Century EB4 Express, Century Formula I 411 & 412, Century Formula I Super Six & 500 Series, Century Formula II, Century Formula 6000 - 600 Series, Century Metro I, Century Modular 211, Century Modular 400 & 600, Century 211 & 212. It will also fit the Challenger 4700 Series, Champion Model 101, Holmes 440 Series, Vulcan Modular 804, and Vulcan Modular 806. To view specific years of wrecker models see Features below. To view part schematics click on the Brochures tab.

Dimensions: 39"L x 5"W x 5"H

Length Eye to Eye: 37.5" L
Fits:

Century EB4 Express (03/1999 to Current)

Century Formula I, Duplex Tilt, 411 & 412 Wreckers

Century Formula I, Duplex Tilt, Super Six & 500 Series

Century Formula II

Century Formula 6000, 600 Series

Century Metro I, Duplex Tilt (D.T.) Wheel Lift System

Century Modular 211 (02/2010 to Current)

Century Modular 400 & 600 (01/2009 - Current)

Century 211 & 212 (11/1997 to Current)

Challenger 4700 Series (02/1995 - Current)

Champion Model 101 (09/1994 - Current)

Holmes 440 Series / DFT 400 (10/1994 - Current)

Vulcan Modular 804 (02/2010 - Current)

Vulcan Modular 806 (02/2010 - Current)

This is rubber fender well material from Miller Industries. This material is sold by the foot.